Ahsoka Tano – TCW S 7 (Siege of Mandalore)

CHARACTER DESCRIPTION:
Ahsoka Tano, nicknamed Snips by her master, was a Force-sensitive Togruta female from the planet Shili who was trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Around 20 BBY, Tano’s friend Barriss Offee, who believed the Jedi Order to be evil, and corrupt, and overly belligerent, orchestrated the bombing of the Jedi Temple on Coruscant, killed the bomber, Letta Turmond, and caused the deaths of clone troopers while framing Tano for these crimes…The Jedi High Council then expelled Tano from the Jedi Order and turned her over to the Republic for trial. Tano came very close to a conviction and death sentence, but she was acquitted at the last minute by the forced confession of a captured Offee. While the Council pardoned Tano and offered to bring her back into the Order, Tano refused, and she left the Jedi Temple.
(Source: Star Wars Databank)

Front Image:
Image URL: https://drive.google.com/file/d/1B4sr6F … drive_link
Source: clonewars.fandom.com

Back Image:
Image URL: https://drive.google.com/file/d/13Y3-ku … sp=sharing
Source: cap-that.com

Head
Make up:
Image URL: https://drive.google.com/file/d/16IdEcZ … sp=sharing
Source: cap-that.com
Required Details:
1. Orange with white markings on the face.
2. White markings as listed below:
a) Two (2) white diamonds on either side of upper forehead.
b) White markings above the eyes curve around the eye socket and are approximately where the eyebrow is.
c) One (1) white cheek marking on each cheek, extending from approximately half an inch (0.5″/1 cm) from the outer corner of eye curving inwards to a point in line with the nostril and curves outwards ending at a point in line with bottom lip of mouth.
3. White markings must be symmetrical and clean.
4. White markings must appear to be part of face.
5. No silicon markings are permitted.
6. Eyebrows must be covered and smoothed down so no hair texture is visible.
7. Makeup must have an overall smooth appearance.
8. Lipstick must be dark purple or dark brown in color.
Optional Details:
1. Nail polish may be maroon or brown in color, if nail polish is not either of these colors it must be a neutral color.

Headpiece:
Image URL: https://drive.google.com/file/d/1IAxnF3 … drive_link
Source: cap-that.com
Required Details:
1. All of wearer’s hair and ears must be covered and hidden by headpiece, no hair may be showing.
2. Headpiece must be made from material to give appearance of skin.
3. Headpiece must have no visible seams and overall appearance must be smooth.
4. If headpiece is fabric-based, fabric must be coated in latex or similar material to give skin-like appearance.
5. Headpiece must be painted white with medium to dark blue or blue-gray stripes in a color.
6. Front lekku must extend to wearer’s natural waist and must not extend past belt.
7. Back lekku must be slightly shorter than front lekku.
8. Montrals must curve slightly out to sides, be firm and come to a point.
Optional Details:
1. Headpiece may be multi-toned in color to closer match references.

Additional Images:
Image URL: https://drive.google.com/file/d/1ptpQXp … drive_link
https://drive.google.com/file/d/1IGUdmF … drive_link
Source: cap-that.com

Crown:
Image URL: https://drive.google.com/file/d/16IdEcZ … sp=sharing
Source: cap-that.com
Required Details:
1. Crown must be worn as a curve-shaped headband and must sit flush to the wearer’s forehead and headpiece.
2. Center front must be angled.
3. Crown must be metallic gray in color.
4. Headband must end at cheekbones.
5. Headband edges must angle down.
6. Headband must have two (2) vertical yellow rectangle details on each end.
7. Rectangles must be approximately a quarter of an inch by three-quarters of an inch (0.25″ by 0.75″/0.5 cm by 2 cm)
Optional Details:
1. Yellow rectangle details may glow and be lit with LEDs.
2. Crown may have lighter weathering around edges.
Additional Images:
Image URL: https://drive.google.com/file/d/1rq5ePj … drive_link
https://drive.google.com/file/d/1wV95ip … drive_link
Source: cap-that.com

Dress:
Image URL: https://drive.google.com/file/d/1IAxnF3 … sp=sharing
Source: cap-that.com
Required Details:
1. Dress must be fitted to wearer, sleeveless and medium to dark blue in color.
2. Dress collar must be approximately one and a half inches (1.5″/3.5-4 cm) wide with a front gap that is approximately one to one and a quarter inches (1-1.25″/2.5-3 cm) wide.
3. Dress must extend to wearer’s mid-thigh and taper to a point in front.
4. Dress hem must be straight and even in back.
5. Collar must have silver or light gold trim along entire length that is approximately quarter of an inch (0.25″/0.5 cm) wide.
6. Each shoulder of dress must have one (1) silver or light gold wedge shape detail with wider end at the top of the shoulder tapering down to a point that is pointing towards arm opening.
7. Chest and upper back must have one (1) geometric detail each that must be silver or light gold in color.
8. Center chest must have double iron heart detail with a line coming off center top point of inner iron heart and line on outer corners of outer iron heart, both lines must extend up to collar.
9. Center line must meet collar trim and outer lines must turn and follow bottom of collar around the neck.
10. Bottom of dress must have geometric detailing that must be silver or light gold in color.
11. Waist must have detailing directly above the belt that extend unbroken around wearer’s entire waist and must be silver or light gold in color.
12. All detailing must match in color, either silver or light gold.
Additional Images:
Image URL: https://drive.google.com/file/d/1fnYdtb … drive_link
https://drive.google.com/file/d/1ieG97S … drive_link
Source: cap-that.com

Gloves:
Image URL: https://drive.google.com/file/d/15w85k7 … drive_link
Source: cap-that.com
Required Details:
1. Gloves must be black or dark gray in color and be made from the same material as a dress.
2. Gloves must be fingerless and reach to wearer’s knuckles.
3. Gloves end just past widest part of bracers.
Additional Images:
Image URL: https://drive.google.com/file/d/1YVxotC … drive_link
Source: cap-that.com

Armor:
Note: The Rebel Legion does not accept EVA foam armor. If armor has EVA foam as a component, it must be finished with fiberglass or other applied method, so it does not look like EVA foam, and has longevity of wear.
Bracer and Hand Plates:
Image URL: https://drive.google.com/file/d/1XntRhb … drive_link
Source: cap-that.com
Required Details:
1. Bracers must start at wrist and end just below wearer’s elbow.
2. Bracers must extend past end of gloves.
3. Bracers must taper in just above wrist and flare out as they extend up wearer’s arm.
4. Widest part of bracer must extend approximately half an inch (0.5″/1 cm) past end of gloves.
5. Bracer must curve in and end in rounded point near wearer’s elbow.
6. Bracer must have one (1) inset black iron heart near wrist of bracer.
7. Iron heart must have five (5) buttons inside, details listed below:
a) One (1) small yellow square, poisitioned closest to wearer’s hand.
b) Two (2) narrow yellow rectangles.
c) Two (2) orange rectangles.
8. Bracer must have a raised silver outline.
9. Bracer must have raised silver Y down middle that connects to the outline.
10. Space on sides of Y side must be medium to dark blue in color.
11. Space above Y shape must be medium to dark gray in color.
12. Bracers must attach to arm with two (2) fabric straps that are black or dark gray in color. Details of straps are listed below:
a) One (1) strap is at narrowest part of bracer.
b) One (1) strap is just above middle of forearm.
Additional Images:
Image URL: https://drive.google.com/file/d/1YVxotC … drive_link
https://drive.google.com/file/d/18k6CvB … drive_link
https://drive.google.com/file/d/15w85k7 … drive_link
https://drive.google.com/file/d/1-_CVW2 … drive_link
Source: cap-that.com

Belt, Waist and Hip Armor:
Image URL: https://drive.google.com/file/d/15t_c-m … drive_link
Source: cap-that.com
Required Details:
1. Belt must be metallic silver or light gray in color and must curve down in front and back.
2. Center front of belt must angle down towards an elongated octagonal-shaped buckle and must be silver or light gray in color.
3. Belt buckle must have two (2) small rectangular-shaped cutouts on sides.
4. Belt buckle must have recessed dark pointed rectangle in middle, this recessed area must be medium gray in color.
5. Three (3) layered dark gray or gunmetal panels must be present on each side of belt.
6. Each panel must be approximately half an inch to three-quarters of an inch (0.5-0.75″/1-2 cm) shorter in length than panel above with bottom panel being approximately three-quarters of an inch (0.75″/2 cm) shorter in length than hip panel.
7. Four (4) dark blue armor parts, with silver color edges.
8. Two (2) armor parts must be covering the hips and are fixed layered panels.
9. Hip armor must have a night owl symbol that must be medium to dark blue and silver in color.
10. Top of hip armor must be wider than bottom and bottom must curve to a point.
11. Hip armor must extend approximately to wearer’s mid-thigh and must be slightly longer than sides of dress.
12. Elongated octagonal-shaped lightsaber clip must be positioned near top of hip armor.
13. Hip armor on the back must consist of four (4) pieces. Details are listed below:
a) One (1) small rectangular-shaped piece must be fixed to main belt and must be brown in color.
b) Center back piece must have shape similar to a goblet or wine glass and must be medium to dark blue in color.
c) Two (2) pieces, one on each side of center back piece must fit together to form an overall rounded trapezoidal shape and must be medium to dark blue in color.
d) Each piece must have a barely visible gap in between each piece.
e) Upper edges must follow the gray panels and hip armor.
f) Back armor part must extend to the same length as dress.
Optional Details:
1. Lighter silver weathering may be present on all armor pieces.
Additional Images:
Image URL: https://drive.google.com/file/d/1RSOZXd … drive_link
https://drive.google.com/file/d/1fnYdtb … drive_link
https://drive.google.com/file/d/1sEGvy6 … drive_link
Source: cap-that.com

Knee, Shin, and Boot Armor
Image URL: https://drive.google.com/file/d/1Ce1KJB … drive_link
Source: cap-that.com
Required Details:
1. Knee armor must be an elongated hexagon shape and must be metallic silver or gray color.
2. Top and sides of knee armor must have pieces that angle back to mold wearer’s knees.
3. Side piece must taper down at bottom of knee armor.
4. One (1) black strap must be connected to the pointed sides of knee armor to secure piece in place.
5. Shin armor must be metallic silver or gray in color.
6. Shin armor must extend from just below knee to just above ankle.
7. Shin armor must cover front half of leg.
8. Bottom of shin armor must slope down from above wearer’s ankle to ankle bone.
9. Shin armor must have a small half oval shape at top and angles down to half oval shape.
10. Ridge must extend down center front of shin armor.
11. Four (4) small tabs, two (2) on each side, must be on top and bottom of shin armor, connecting to two (2) black straps used to secure shin armor to wearer’s leg.
12. Boot armor must be made of three (3) separate pieces and must be metallic silver or gray in color.
13. Top segment of boot armor must sit underneath shin amor.
14. Boot segments must sit underneath and extend out from piece above.
15. Boot armor must have a ridge down center.
16. Boot armor must extend to toe crease of boot.
17. Bottom segment of boot armor must be longest of three (3) pieces.
Optional Details:
1. Lighter silver weathering may be present on all armor pieces.
Additional Images:
Image URL: https://drive.google.com/file/d/12amt-a … drive_link
https://drive.google.com/file/d/1yBiSUR … drive_link
https://drive.google.com/file/d/1sEGvy6 … drive_link
Source: cap-that.com

Leggings:
Image URL: https://drive.google.com/file/d/1B4sr6F … drive_link
Source: clonewars.fandom.com
Required Details:
1. Leggings must be black or dark blue in color.
2. If dark blue, must be darker than dress.
3. Leggings must be fitted to wearer, must be opaque and not sheer.
4. Leggings must have no extra seams.
5. Leggings must tuck into boots.

Boots:
Image URL: https://drive.google.com/file/d/1Ce1KJB … drive_link
Source: cap-that.com
Required Details:
1. Boots must be made from leather or leather-like material and must be black or dark brown in color.
2. Boots must reach to wearer’s knees in height.
3. Boots must have a small heel, approximately one inch (1″/2.5 cm) wide.
Optional Details:
1. Boots may be square-toed in shape.

Lightsaber
Image URL: https://drive.google.com/file/d/1JQk7mQ … drive_link
Source: Starwars.fandom.com
Required Details:
1. Lightsabers must be two (2) Ahsoka Tano Hero lightsaber hilts, similiar styled hilts are acceptable.
2. One (1) hilt, the shoto, must be slightly shorter than the other.
3. Both lightabers must have the same detailing.
4. No toy sabers, no Ultimate FX short saber.
Optional Details:
1. Lightsaber may be a static prop (hilt-only).
2. Attached blade(s), LED lights, and sound effects, are allowed but not required.
3. If bladed, both blades must be blue in color.
Additional Images:
Image URL: https://drive.google.com/file/d/1G1Px08 … drive_link
Source: cap-that.com

Optional Items

Cloak:
Image URL: https://drive.google.com/file/d/1kWNQX3 … drive_link
Source: cap-that.com
Required Details:
1. Cloak must be made of flat-textured fabric and must be medium to dark gray in color.
2. Cloak fastener must not be visible and must be inconspicious, located at wearer’s neck.
3. Cloak must reach to top of wearer’s shin armor and come to a point in front and back.
4. Sides of cloak must be shorter than front and back.
5. When worn up, hood must be big enough to go over montrals.
6. When worn down, hood must extend down to wearer’s mid-back.
7. Hood shape must be rounded and not come to a point.
Additional Images:
Image URL: https://drive.google.com/file/d/1WQSPjQ … drive_link
https://drive.google.com/file/d/14ZVT-K … drive_link
Source: cap-that.com

Costume Resources: Reference Photo Gallery – https://drive.google.com/drive/folders/ … drive_link

Author: Commander_Poptart

Uploaded: February 11th 2026