CHARACTER DESCRIPTION
Avar Kriss was a human female Jedi Master of the Jedi Order during the time of the High Republic. Noble and selfless, Kriss was an inspiration to many of her fellow Jedi. She served on the Starlight Beacon, a space station on the frontier of the galaxy. Kriss was heavily involved in the aftermath of the hyperspace catastrophe known as the Great Hyperspace Disaster. After helping to put a stop to the Drengir crisis, Kriss helped lead the Republic’s response to the Nihil marauders who had caused the Great Hyperspace Disaster in the first place. As the Nihil conflict dragged on, Kriss continued to put pressure on herself and began to give into her anger.
(Source: https://starwars.fandom.com/wiki/Avar_Kriss Wookiepedia)
Front Image: URL: https://drive.google.com/file/d/1zh4MTk … sp=sharing
Source: Concept Art
Back / Second View Image:
URL: https://drive.google.com/file/d/1KH9-f6 … sp=sharing
Required Items
Head:
Image URL: https://drive.google.com/file/d/1tWmDyX … sp=sharing
Required Details:
1. Hair is parted in the center with long bangs framing the face. The top section behind the bangs is braided straight back. The remainder is worn loose or in a very low tail or braided low bun.
2. Somewhere between shoulder and mid back in length.
3. Blonde is preferred but all natural colors are allowed. Acceptable variation has no bangs or braids.
Optional Details:
1. Shoulder length open hair without bangs is acceptable.
Additional images:
https://drive.google.com/file/d/1uYzrqb … sp=sharing
https://drive.google.com/file/d/1kIPxB- … sp=sharing
Tiara:
Image URL: https://drive.google.com/file/d/1lVvsAA … sp=sharing
Required Details:
1. The tiara has a solid cast appearance. Gold toned with blue/green oval stone (stone may be pointed or round on ends).
2. Tiara has zigzags, petals, or some form of curl pointing downward above the arch of the brow.
Additional images:
https://drive.google.com/file/d/1Wj2NYl … sp=sharing
https://drive.google.com/file/d/1RaFqLq … sp=sharing
Shoulder Armor:
Image URL: https://drive.google.com/file/d/1M2zDo8 … sp=sharing
Required Details:
1. Structured and made of leather or leather-like fabric. Dark brown or black (darker than all other items), with 3 – 4 defined sections on each shoulder.
2. Comes to a point that ends approximately at the sternum. High collar that is approximately 2 inches in back and tapers to lower edge of armor. Approximately 1 – 2 inches (2 – 4 cm) beyond shoulders in width.
3. Trimmed in gold. Shows the cap sleeves/epaulets of the tunic but not the tabards at the shoulder.
Additional images:
https://drive.google.com/file/d/1kIPxB- … sp=sharing
Bracers:
Image URL: https://drive.google.com/file/d/1LNTEC9 … sp=sharing
Required Details:
1. Leather or hard armor in gold and blue/gray/silver/brown, with sunray-like lines, gold edging, and gold greebly on the wrist.
2. Hand plate is solid gold and detached, with etched, sunray design. Both hand plate and arm area come to rounded points. Hand plate may also be completely rounded. Secured with 2 – 4 straps on arm and one on hand that are black, gold, or brown. Straps may be straight or lace diagonally up arm.
Additional images:
https://drive.google.com/file/d/1zlft14 … sp=sharing
Armlets:
Image URL: https://drive.google.com/file/d/1csxi3a … drive_link
Required Details:
1. Brown fabric worn over inner tunic sleeves and under bracers. Fabric matches tabards.
2. Covers lower part of the sleeve entirely and the outside of the hand.
Additional images:
https://drive.google.com/file/d/14j0XMQ … sp=sharing
https://drive.google.com/file/d/1ZLVVpO … sp=sharing
Inner Tunic:
Image URL: https://drive.google.com/file/d/16ml6Ux … sp=sharing
Required Details:
1. Inner tunic is white or off white and preferably made of a non textured fabric.
2. Inner tunic crosses left over right with a 2 inch ( approx 4 – 5 cm) collar panel.
3. Sleeves are full and gather into armlets. Not visible below the outer tunic. No visible shoulder tucks, and shoulder seams are hidden under the outer tunic.
Optional Details:
1. Inner tunic can have a gold trim at the collar.
Outer Tunic:
Image URL: https://drive.google.com/file/d/1zh4MTk … sp=sharing
Required Details:
1. Outer tunic is made of brown leather or leather-like material, it’s darker than or same shade as tabards.
2. Worn over the inner tunic and under the tabards.
3. Structured and curved double layered epaulets can be seen under the tabards and reach over the shoulder. The epaulets are best sewn directly onto the tunic and are made of leather/leather-like material or very heavy, unstructured brown fabric.
4. Tunic closes on sides well above the obi. The tunic may cross in front either right over left or left over right.
Optional Details:
1. Side vents.
2. Collar panel.
3. Gold trim, only present at lower edge.
Additional images:
Tabards:
Image URL: https://drive.google.com/file/d/1zh4MTk … sp=sharing
Required Details:
1. Tabards are brown heavy fabric/leather or leather-like vest tabards, worn over the outer tunic and under obi and shoulder armor.
2. Brown may either be the same shade as the outer tunic or lighter/redder.
3. Same length front and back with gold trim fully encasing the edge.
4. Gold High Republic Jedi “peacock” symbol on front, with at least 3-4 “swoops” on each side. Ends may be rectangular or gently pointed.
5. The back has no ornamentation other than gold trim around the edges. Back of tabards can be rectangular or pointed.
Optional Details:
1. Tabards wider at the base than at the shoulders, coming to a point at the bottom.
Obi:
Image URL: https://drive.google.com/file/d/1Cq1wGr … sp=sharing
Required Details:
1. Narrow dark brown fabric obi worn under belt and over tabards, in the same shade as tabards or darker (but no darker than tunic). May be as narrow as just visible around the belt, or as wide as an inch and a half (2,5 – 3 cm) above and below the belt.
2. No visible closures.
Optional Details:
1. Obi wider at the front than the back.
2. Obi trimmed in gold, or left plain.
Belt and Lightsaber Holster:
Image URL: https://drive.google.com/file/d/1Cq1wGr … sp=sharing
Required Details:
1. Belt is worn over tabards. Prequel-like construction with a wider inner 2 – 3 inch (6 – 7 cm) belt and a slimmer outer belt.
2. Belt can either have a buckle or a decorative ornament in the center.
3. Belt buckle is gold metallic in the shape of the Jedi crest from the era (with 4 swoops on each side and optional green stone in center), or a gold rectangular side release buckle, or a modified Jedi crest with rounded swoops and green stone center (see references).
4. Belt has pouches which may be anywhere from 2 large to 5-6 small ones, matching the belt. Rectangular shape, with rectangular flap covering at least half of front of pouch.
5. The Saber holster is secured to belt on left hip, attached to belt with two or three straps. One strap should cross in front to the right hip, and one strap should extend from the bottom of the holster up to the back on the left side. A third strap may be needed extending straight up to the left hip. Should be brown with gold trim. Stiff and structured with open front, with enclosed bottom and single strap near the top. Preferably made of leather or leather-like material, but can have metal added to it.
Optional Details:
1. The buckle with a green stone in the center.
2. Gold studs or Chicago screws may secure the thin belt in front.
3. The thin belt has rounded ends in front.
4. Decorative grooving on edges of belt, but no gold trim.
5. Pouches have a gold trim on flap, gold button/clasp on flap.
6. May have an optional additional pouch on straps directly below other pouches on left side, over the holster.
Additional Images:
https://drive.google.com/file/d/16TF8P6 … sp=sharing
https://drive.google.com/file/d/1bDnmBI … sp=sharing
Pants:
Image URL: https://drive.google.com/file/d/1KH9-f6 … sp=sharing
https://drive.google.com/file/d/1lRPEcJ … sp=sharing
Required Details:
1. Pants are white, off-white or brown. Loose, blouses at boot tops.
2. Pants have no visible pockets or decoration.
Boots:
Image URL: https://drive.google.com/file/d/1UIHeND … sp=sharing
Required Details:
1. Brown and unornamented leather/pleather, strap at the top, with spats secured by 2 straps.
2. Spats are rectangular and have a brown leather look. They are positioned on top of foot and have 4 rounded indents, reminding of buttons/screws. One strap is secured around the ankle, the other around the foot sole.
3. There are no visible closures. Zipper on the inside leg is allowed and must be covered.
Optional Details:
1. Toes of boot have geometrical lines as seen in reference.
Additional Images:
https://drive.google.com/file/d/11MM6IF … sp=sharing
Lightsaber:
Image URL: https://drive.google.com/file/d/18dHrWf … drive_link
Required Details:
1. Hilt is silver with gold details.
2. Crossguard is curved upwards coming to a point and gold in color.
3. Activation button is directly under the crossguard, gold in color and in a diamond shape with a central line through the middle (top to bottom).
4. Hand grip has a diamond shaped detail similar to the activation button with two (2) boomerang shapes on either side that reach the halfway point of the diamond.
5. Pomel is flat and non-descript with alternating discs of gold, silver, gold, silver and silver (top to bottom).
6. The lightsaber may be a static prop (hilt-only).
7. No toy sabers, no Ultimate FX short saber.
Optional Details:
1. Attached blade(s), LED lights, and sound effects, are allowed but not required.
2. If bladed, must be green.
Optional Items
Outer Robe:
Image URL: https://drive.google.com/file/d/1KH9-f6 … sp=sharing
Required Details:
1. Outer Robe is ankle length.
2. It is single or double lined with gold trim/piping on robe front edges and sleeves, optional at hem.
3. Robe is brown, may be the same shade as either tunic or tabards or somewhere in between.
4. The hood is large, like usual Jedi robes, reaching down to middle of back when worn down and sides lying on the shoulders when worn up.
5. Robe has wide bell sleeves, ¾ or full length.
6. Robe is held together at the front by a golden cord, which is attached to a golden, ornamental disc/brooch like element on either side of the robe. The cord can further hang down of the disks.
Additional Images:
https://drive.google.com/file/d/19qV3jG … sp=sharing
https://drive.google.com/file/d/1EZk9RI … sp=sharing
Costume Resources: Reference Photo Gallery –
https://drive.google.com/drive/folders/ … QsI0SxJOCY
Authors: Meg Deveraux(sewmuchlife), Nicole Albrecht (Yulistar)
Uploaded: 3rd February 2026