CHARACTER DESCRIPTION:
Han Solo rose from an impoverished childhood on the mean streets of Corellia to become one of the heroes of the Rebel Alliance. As captain of the Millennium Falcon, Han and his co-pilot Chewbacca came to believe in the cause of galactic freedom, joining Luke Skywalker and Princess Leia Organa in the fight against the Empire. After the Battle of Endor, Han faced difficult times in a chaotic galaxy, leading to a shattering confrontation with his estranged son Ben.
(Source: Wookieepedia – http://starwars.wikia.com/wiki/Han_Solo)
Front Image
URL: https://drive.google.com/file/d/1Rrc9K9 … drive_link
Source: Solo a Star Wars Story Visual Guide
Back / Second View Image
URL: https://drive.google.com/file/d/1jEweqL … drive_link
Source: Solo a Star Wars Story
Required Items
Hair
URL: https://drive.google.com/file/d/1Rrc9K9 … drive_link
Source: Solo a Star Wars Story Visual Guide
Required Details
1. Naturally occurring hair colors allowed (brown recommended); if a wig is used it must be high quality and look like real hair.
2. Hair is parted.
3. No beards or mustaches.
Shirt
URL: https://drive.google.com/file/d/1xCJRQc … sp=sharing
Source: Solo Costume Exhibit
Required Details
1. The shirt is a long-sleeved black to dark charcoal waffle-textured shirt.
2. The shirt sleeves are pushed up to just below the wearer’s elbows.
3. The collar has a raw edge.
4. The shirt is worn tucked into the pants.
5. The shirt is weathered with a white paint-like substance.
Optional Details:
1. There are several small tears near the bottom of the sleeves.
Additional Images
URL: https://drive.google.com/file/d/17pA_Di … drive_link
Source: Solo Costume Exhibit
Vest
URL: https://drive.google.com/file/d/1SQFme7 … sp=sharing
Source: Solo Costume Exhibit
Required Details
1. The vest is made of a leather or leather-like material.
2. The outside of the vest is painted white. The white paint is heavily weathered to produce a crackled finish.
3. The vest is lined in a black leather or leather-like material.
4. There is no visible topstitching along the entire hem of the vest.
5. The vest has a black mandarin-style collar with topstitching along the edges.
6. The sleeve openings of the vest are trimmed in black leather or leather-like material.
7. The left side of the vest opening has a 2 inch (5 cm) section folded back on itself to reveal the black lining.
8. Both sides of the vest opening have lengths of brown 3-ribbed tubing/wiring attached. Accurate greeblies are attached to the tops and bottoms of the tubing.
9. The front of the vest features two slanted welted pockets. The welts of these pockets are black and are approximately 6.5 inches (16 cm) in length.
10. The vest has a yoke that begins on the front about 1.5 inches (4 cm) before the end of the mandarin collar. The back of the yoke extends to the middle of the wearer’s shoulder blades in back.
11. There is a black leather or leather-like strip in the seams of the yoke in front and back, with two rows of topstitching above the strips.
12. Just under the yoke on the right side front of the vest, there are 3 imperial code disks in a triangular layout.
13. Just above the yoke line on the right side front of the vest are 2 black grommets side-by-side.
14. There is a black grommet on the left front side just beside the sleeve trim, under the yoke line.
15. The backside of the vest has 2 black grommets stacked vertically just beside the left sleeve trim, above the yoke line.
16. The back of the vest has a large bottom waistband seam with topstitching above and below the seam.
17. There are black leather or leather-like panels under each arm, panels are approximately the width of the wearer’s arm. There are two 1 inch (2.5 cm) leather or leather-like strips with rectangular buckles sewn along the bottom of these panels. The top strip is black and the bottom strip is white. The buckles are positioned on the front panels of the vest.
18. There is a greeblie attached to the right front side of the vest, along the hem and right next to the brown tubing. Greeblie is silver/gray with a yellow rectangular button.
Additional Images
Image URL: https://drive.google.com/file/d/1xCJRQc … sp=sharing
Source: Solo Costume Exhibit
Image URL: https://drive.google.com/open?id=1P98be … m1VCYElI4_
Source: Solo a Star Wars Story
Belt
URL: https://drive.google.com/file/d/1ZiyIvF … sp=sharing
Source: Solo Costume Exhibit
Required Details
1. Belt is made of black leather or leather-like material and is approximately 1.5 inches (4 cm) wide.
2. Belt is punctured entirely with columns of three holes and each column is spaced approximately 0.75 of an inch (2 cm) apart.
3. Belt has a two-pronged square-shaped buckle with rounded edges, black in color.
Optional Details:
1. Light weathering on the belt.
Holster Belt
URL: https://drive.google.com/file/d/1qfBgPN … sp=sharing
Source: BlogMickey
Required Details
1. The belt is 2 inches (5 cm) wide, made of a medium brown leather, or leather-like material and has a plain silver belt buckle.
2. There are two holes punched into the buckle. A dark leather or leather-like cord is laced through the holes and tied behind the buckle out of visibility.
3. There are two Chicago screws in a vertical line to the right of the buckle, slightly closer together than the holes in the belt buckle.
4. There is brown leather belt loop at front of wearer’s right hip.
5. To the left of the buckle, a brown, vertical, leather or leather-like loop secures a droid caller.
6. Leather or leather-like cording affixed just behind the droid caller, secures a grouping of 5 code cylinders that dangle below the droid caller.
7. Leather or leather-like hanging pocket secures behind the wearer’s left hip with a snap and holds two tubular greeblies/tools, the smaller of which is approximately 2.5 inches (6 cm) long, and the larger of which is approximately 7.5 inches (19 cm) long.
8. The pocket for the larger greeblie/tool has 8 thin strips across it just above the bottom.
9. The pocket for the smaller greeblie has two holes in a vertical line with leather or leather-like cord tied through each hole respectively and finished in a knot.
– The lower hole has a silver rectangular clip dangling below the smaller greeblie/tool.
10. An oval shaped mirrored object, approximately 5 inches (approx. 13 cm) long, hangs at the wearer’s right hip.
– The mirrored surface is weathered down.
11. A white, rectangular cylinder, just longer than the mirror, hangs from a black clip on the belt between the rectangular brown pouch and the mirror.
– It has a round red button and a rectangular black button.
12. Rectangular brown, leather or leather-like pouch sits behind the white cylinder, with no visible closures.
13. A dark-gray pouch sits behind the rectangular pouch.
– This pouch is weathered with white paint-like substance.
– A strap runs along the top of the pouch.
– A round ring splices the strap in the middle, and a lanyard clip hangs from this ring.
Additional Images
URL: https://drive.google.com/file/d/1WbDX6_ … sp=sharing
Source: Solo Costume Exhibit
URL: https://drive.google.com/file/d/1jEweqL … drive_link
Source: Solo A Star Wars Story
Pants
URL: https://drive.google.com/file/d/1yUio7o … sp=sharing
Source: Solo Costume Exhibit
Required Details
1. Black slim-leg pants made out of a twill or similar such material with jeans-style front pockets.
2. There are charcoal/black “brick vinyl” bloodstripes (extra thick iron-on) down the outer sides of legs.
3. Right back pocket is a standard jeans-style shape.
4. Left back pocket has a leather-like rounded facing/slit, showing 2 gold/brass rivets below the pocket’s opening.
5. The pants are distressed and heavily weathered with a white, paint-like substance.
6. Pants are loose enough to cover the tops of the boots.
Additional Images
URL: https://drive.google.com/file/d/1Rrc9K9 … drive_link
Source: Solo a Star Wars Story Visual Guide
Boots
URL: https://drive.google.com/file/d/1k_iiHA … sp=sharing
Source: Solo Costume Exhibit
Required Details
1. Dark-colored gray engineer-style boots.
2. There is approximately 1 inch (2.5 cm) strap around ankle of boot, with simple slide-buckle at the outside of ankle.
3. The boots are nearly entirely covered with mud/paint-like substance.
Additional Images
URL: https://drive.google.com/file/d/1Rrc9K9 … drive_link
Source: Solo A Star Wars Story Visual Guide
Hands/Gloves
URL: https://drive.google.com/file/d/1qfBgPN … sp=sharing
Source: BlogMickey
Required Details
1. Cream/faded yellow driving gloves with black palms and black wrist strap under D-shaped cutout.
2. Grayish-beige gauze or cotton crepe-like bandages are wrapped around wrists above driving gloves.
Additional Images
URL: https://drive.google.com/file/d/155Lcox … drive_link
Source: Solo A Star Wars Story
Optional Item
Blaster
URL: https://drive.google.com/file/d/19e2MD4 … drive_link
Source: Solo A Star Wars Story Visual Guide
Required Details
1. Blaster is a DL-44 style.
2. Blaster is primarily black in color.
3. Handle grips are a medium brown.
Optional Details:
1. Light weathering.
Additional Image Gallery
https://drive.google.com/drive/folders/ … YVpc0esEdF
Uploaded: 3rd February 2026
PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum.