CHARACTER DESCRIPTION
An esteemed Jedi Master and a swordsman of great skill, Cin Drallig was the head of security for the Jedi Temple on Coruscant. He is in command of the Temple Guard assignments, and also serves as a lightsaber instructor, as all veteran Jedi are encouraged to pass on what they have learned to a new generation of Padawan learners. Though it smacks of disrespect, Drallig has earned the unflattering nickname of “the Troll” among the Order.
(Source: Star Wars Databank)
Front Image:
Image URL: https://drive.google.com/file/d/1ZnRBJv … sp=sharing
Source: Episode III – Promotional shot
Back / Second View Image
Image URL: https://drive.google.com/file/d/1Ztdd4f … sp=sharing
Source: https://starwarsscreencaps.com
Required Items:
Head:
Image URL: https://drive.google.com/file/d/1MEInQC … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Hair is long, slightly wavy and reaches under the shoulders.
2. Hair is tied back from forehead in a ponytail, that falls loosely with rest of hair.
3. Natural hair colors only permitted, recommended hair color is dark blonde.
4. Face must be clean shaven.
5. Wig is allowed, but must be high quality and look like real hair.
Inner Tunic:
Image URL: https://drive.google.com/file/d/1MEInQC … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Dark brown inner tunic with long fitted sleeves, recommended fabric is gauze or double muslin.
2. Inner tunic has a wide collar, approximately 2 inches (5cm) wide.
Outer Tunic:
Image URL: https://drive.google.com/file/d/1Mz3Nks … sp=sharing
Source: Dressing a Galaxy – The costumes of Star Wars by Trisha Biggar
Required Details:
1. Dark reddish-brown long sleeved outer tunic, recommended natural fabrics such as linen, cotton, silk or wool.
2. Outer tunic covers the crotch and has a collar that is approximately 2 inches (5cm) wide.
3. Sleeves are wide, bell shaped and cover wrists.
3. Outer tunic closes left over right.
4. Outer tunic extends past the crotch and buttocks area by approximately 4 inches (10cm).
Additional Images:
Image URL: https://drive.google.com/file/d/1Ztdd4f … sp=sharing
Source: https://starwarsscreencaps.com/4k-star- … sith-2005/
Tabards:
Image URL: https://drive.google.com/file/d/1Mz3Nks … sp=sharing
Source: Dressing a Galaxy – The costumes of Star Wars by Trisha Biggar
Required Details:
1. Dark reddish-brown tabards and made of same fabric as outer tunic.
2. Tabards are slightly wider than shoulders.
3. Tabards reach past bottom hem of outer tunic by approximately 2 inches (5cm) in front and end at the obi in back.
4. Tabards must be in Y-formation placement, meeting under obi and are parallel to bottom.
Optional Details:
1. Tabards have a visible seam running parallel to edges of tabards, approximately half an inch (0.5” / 1.5 cm) away from edge of tabards.
Additional Images:
Image URL: https://drive.google.com/file/d/1MEInQC … sp=sharing
Source: Episode III – Promotional shot
Obi:
Image URL: https://drive.google.com/file/d/1Mz3Nks … sp=sharing
Source: Dressing a Galaxy – The costumes of Star Wars by Trisha Biggar
Required Details:
1. Dark reddish-brown obi and made of same fabric as outer tunic.
2. Obi is a self-scrucnhing style and approximately two (2) times wider than belt.
Belt:
Image URL: https://drive.google.com/file/d/1ZnRBJv … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Belt is Dark brown in color and made of leather or leather like material.
2. Main wider belt is approximately 2 – 3 inches (5 – 7.5 cm) wide. Secondary outer belt is approximately one inch (2 – 2.5cm) wide.
3. Silver rectangular snap buckle is fixed on front of secondary belt.
4. Keepers on either side of buckle must match belt in color and material.
5. Secondary outer belt is fixed with 8 sam brown studs or similar, studs are evenly positioned along the belt length.
6. Belt closure method on back must be covered by a belt closure cover.
7. Belt accessories placement order (from buckle to wearer’s right): buckle, pewter food capsule, pouch, belt closure cover, pouch and covertec clip.
Pouch:
Image URL: https://drive.google.com/file/d/1arNIs6 … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Two wide ribbed brown pouches.
2. Pouches have hard casing and are approximately 4 inches long by 6 inches wide (10cm x 15cm).
3. One (1) pouch is worn on wearer’s left side and one (1) is worn on wearer’s right side.
Covertec clip:
Image URL: https://drive.google.com/file/d/1E0lbgq … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Black covertec lightsaber clip.
2. Covertec is positioned wearer’s left side and clipped over main wider belt.
Food capsules:
Image URL: https://drive.google.com/file/d/1ZnRBJv … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. One (1) pewter food capsule, placed on weaer’s right side in front of pouch.
Pants:
Image URL: https://drive.google.com/file/d/1FCPZoL … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Pants must be grey to taupe in color and made of natural materials such as cotton, linen, silk or wool.
2. Pants must be wide and tucked into boots with slight blousing.
3. No visible closures and pockets permitted.
Boots:
Image URL: https://drive.google.com/file/d/1FCPZoL … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Medium Brown mid-calf high square-toed Engineer or Biker style boots.
2. Boots must be made of leather or leather like material with a matte or suede appearance.
3. Spat covering instep of boot must be approximately 3 inches high and 6 inches wide (7cm x 15cm).
4. One (1) strap approximately 1 inch (2.5cm) runs across instep of boot. One (1) rectangular-shaped buckle is present on outside ankle.
5. Strap passes through slots 1 inch (2.5cm) from edge of each side of spat.
6. Sides of spat must be rounded.
7. A reddish brown panel approximately 7 inches high and 4 inches wide (18cm x 10cm) is affixed to outside of boot, covering any dart or buckle present at top of boot.
Optional Details:
1. Boots are weathered and scuffed around foot area in a pattern showing the edge of a steel toe box.
Additional Images:
Image URL: https://drive.google.com/file/d/1ZnRBJv … sp=sharing
Source: Episode III – Promotional shot
Lightsaber:
Image URL: https://drive.google.com/file/d/1E0lbgq … sp=sharing
Source: Episode III – Promotional shot
Required Details:
1. Silver coloured lightsaber hilt.
2. Lightsaber may be a static prop (hilt-only).
3. No toy sabers, no Ultimate FX short saber.
Optional Details:
1. Attached blade(s), LED lights, and sound effects, are allowed but not required.
2. If bladed, must be green
Costume Resources:
– Reference Photo Gallery – https://drive.google.com/drive/u/0/fold … Z0A4EL_M0-
Author: Yulistar (Nicole Albrecht) and Leroni (Leroni Verodek)
Revision Date: 1st February 2026