CHARACTER DESCRIPTION
A Kel Dor from Dorin, Plo Koon was among the wisest members of the Jedi Order, respected for his level-headed analysis of events and unflappable calm. Deeply concerned for life in all its myriad forms, Plo was especially devoted to protecting the clones under his command. He shared a special bond with Ahsoka Tano, whom he’d brought to the Jedi Order as a toddler. One of many victims of Order 66, Master Plo died at Cato Neimoidia when his wingmen shot down his starfighter.
(Source: Star Wars Databank )
Front Image:
Image URL: https://drive.google.com/file/d/1LtI04J … sp=sharing
Source: KJO Archive
Back / Second View Image:
Image URL: https://drive.google.com/file/d/1i5HA0p … sp=sharing
Source: cap-that.com
Required Items:
Mask and Respirator:
Image URL: https://drive.google.com/file/d/1lAjvbr … sp=sharing
Source: KJO Archive
Required Details:
1. Mask is made from material such as silicone, latex, or similar material to give the appearance of skin and does not appear to be shiny, rigid, or hard.
2. Mask has no visible seams and ends are hidden under the collar.
3. Mask is soft orange or orange-tan in color.
4. Mask has inset goggles that are oval shaped.
5. A nose bridge is present connecting the goggle eye pieces in their inner corners.
6. Goggles have multiple small circular holes which are on slightly recessed part of the lenses.
7. Goggles are painted bronze or silver and are lightly weathered with bronze or brown tones.
8. Respirator is made of rigid material and attaches to the mask over the nose and along the cheek bones under the eyes.
9. Respirator has an overall shape similar to a triangle.
10. Respirator has recessed ‘cheek’ pieces.
11. Respirator has a diamond shaped vent in the middle of the front piece.
12. Respirator is covered in a decorative pattern that is similar to Damascus metal.
13. Respirator has two mandibles present underneath the main section.
14. Mandibles pieces consist of short. ‘L’ shaped piece that connects to the lower part of the main section of the mask and ear loops of the mask.
15. Other side of mandibles have a cube then a short cylinder and finally end in long tapered rectangle.
16. Mandibles connect to the ear loops of the mask from the backside.
17. Respirator is painted bronze or silver and is weathered with bronze and brown tones.
Additional Images:
Image URL:
https://drive.google.com/file/d/1zTskya … drive_link
Source: Movie used Costume Display
Image URL:
https://drive.google.com/file/d/1pv7QcI … sp=sharing
Source: cap-that.com
Image URL: https://drive.google.com/file/d/1SYuKib … drive_link
Source: Behind the Scenes photo
Hands:
Image URL: https://drive.google.com/file/d/1RG8OPB … sp=sharing
Source: KJO Archive
Required Details:
1. Hands are made from material such as silicone, latex, or similar material to give the appearance of skin and does not appear to be shiny, rigid, or hard.
2. Hands are soft orange or orange-tan in color, matching the mask.
3. Hands have 4 fingers that have long pointed nails.
4. Longest (middle) finger has a finger cover present on each hand.
5. Finger cover is made of a rigid material and is painted bronze and weathered with shades of brown and black.
6. Finger cover extends past the end of the finger and comes to a point.
7. Finger cover has a knuckle-like pattern.
8. Hands should appear seamless and ends are hidden under the sleeves of the Undershirt.
Additional Images:
Image URL: https://drive.google.com/file/d/1_we5Jh … drive_link
Source: KJO Archive
Image URL: https://drive.google.com/file/d/1ZHRSXQ … sp=sharing
Source: screen-cap.com
Image URL: https://drive.google.com/file/d/1pk7_g8 … drive_link
Source: cap-that.com
Undershirt:
Image URL: https://drive.google.com/file/d/17yA51h … drive_link
Source: cap-that.com
Required Details:
1. Tailored fit tan colored shirt with a high collar that fits snugly around the neck.
2. Shirt material is linen, wool, or other natural fibers. It may have a light stretch to it.
3. Collar has 2 ribbed sections.
4. Sleeves are long and end in a cuff at the wearer’s wrist.
Inner Tunic:
Image URL: https://drive.google.com/file/d/1i5HA0p … drive_link
Source: cap-that.com
Required Details:
1. Inner tunic is light reddish-brown in color which is lighter than the Outer Tunic.
2. Inner tunic should be made of linen, wool, or other natural fibers
3. Folds right over left in a “V” neckline, crossing in the middle of the chest above the bust allowing the undershirt to show.
4. Collar band is the only visible part of this garment.
Optional Details:
1. Inner tunic is either sleeveless or has sleeves that are not visible.
2. Inner tunic may be a dickie instead of a full length garment.
Additional Images:
Image URL: https://drive.google.com/file/d/1jtj5Np … drive_link
Source: KJO Archive
Outer Robe:
Image URL: https://drive.google.com/file/d/1NC24rd … drive_link
Source: KJO Archive
Required Details:
1. Robe is a dark brown color which is darker than the Inner Tunic.
2. Robe is floor length and made from wool or wool-like material.
3. Robe folds left over right in a “V” neckline, crossing in the middle of the chest allowing approximately 1-2 inches (2-5 cm) of the Inner Tunic to show through.
4. Sleeves are loose fitting and should hang at least to the knuckles when the arms are held down at the side.
5. Sleeves should flare larger at the end near the hand.
6. Shoulder seams are tucked.
7. Robe has tabards that go over the wearer’s shoulders and run down the front, ending at the hem of the robe.
8. Upper edges of the tabards are tucked or sewn into the Robe at the collar.
9. Tabards are an extension of the wide oversized hood which reaches halfway down the wearer’s back.
Additional Images:
Image URL: https://drive.google.com/file/d/1jtj5Np … sp=sharing
Source: KJO Archive
Image URL: https://drive.google.com/file/d/1x_Xoll … sp=sharing
Source: cap-that.com
Image URL: https://drive.google.com/file/d/14kDRzY … drive_link
Source: KJO Archive
Image URL: https://drive.google.com/file/d/1lAjvbr … drive_link
Source: KJO Archive
Pants:
Image URL: https://drive.google.com/file/d/1UcXf9U … drive_link
Source: cap-that.com
Required Details:
1. Pants are tan in color, matching the color of the undershirt.
2. Pants are made of natural materials (cotton, linen, silk, wool).
3. Pant legs should be loose-fitting and straight.
4. Pants are tucked into boots and have no visible pockets.
Boots:
Image URL: https://drive.google.com/file/d/1mNg5Fn … drive_link
Source: KJO Archive
Required Details:
1. Boots are leather or leather-like material.
2. Boots are medium brown in color.
3. Boots have a low heel.
4. Boots should have no visible zippers or closures.
Optional Details:
1. Boots have a black textured sole.
2. Plo Koon Clone Wars era boots are acceptable.
Additional Images:
Image URL: https://drive.google.com/file/d/1UcXf9U … drive_link
Source: cap-that.com
Lightsaber:
Image URL: https://drive.google.com/file/d/1zeQ3rX … sp=sharing
Source: Wookiepedia
Required Details:
1. Plo Koon’s hero lightsaber hilt.
2. Saber pommel must come to a flattened-point tip.
3. Lightsaber may be a static prop (hilt-only).
4. No toy sabers, no Ultimate FX short saber.
Optional Details:
1. Attached blade(s), LED lights, and sound effects, are allowed but not required.
2. If bladed, must be blue.
Additional Images:
Image URL: https://drive.google.com/file/d/1zeQ3rX … sp=sharing
Source: KJO Archive
Costume Resources:
– Reference Photo Gallery –
https://drive.google.com/drive/folders/ … drive_link
Author: Myri_Jean
Updated: March 1st 2026
PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.