Anakin Skywalker Episode III

Anakin Skywalker (Episode III)

ALL, Episode III (ROTS), Jedi

CHARACTER DESCRIPTION

Discovered as a slave on Tatooine by Qui-Gon Jinn and Obi-Wan Kenobi, Anakin Skywalker had the potential to become one of the most powerful Jedi ever, and was believed by some to be the prophesied Chosen One who would bring balance to the Force. A hero of the Clone Wars, Anakin was caring and compassionate, but also had a fear of loss that would prove to be his downfall. (Source: Star Wars Databank)

Anakin Skywalker Episode III Anakin Skywalker Episode III

Front Image:
Image URL: https://drive.google.com/file/d/1lwIjwE … drive_link

Second View Image:
Image URL: https://drive.google.com/file/d/17dtpbS … drive_link

Head:
Image URL: https://drive.google.com/file/d/1CpSMkc … drive_link
Required Details:
Hair:
1. Natural hair colors only (dark blonde or light brown preferred).
2. Hair is styled to be shaggy (tangled) with slight curls in appearance, parted on the right side with curtain fringe going to the left.
3. Hair is shorter in the front and longer in the back with varied blended layers, does not go past shoulder length.
4. If the wearer is using a wig, all of the wearer’s natural hair must be covered by the wig. Wig must be high quality and look like natural hair.
Face:
1. Face must be clean shaven.
2. Over the right eye, there is a scar that goes across the brow.
Scar:
1. Scar positioned over the outer corner of the right eye and eyebrow.
2. Scar extends from approximately 0.5” (1.25cm) above the eyebrow to approximately 1” (2.5cm) below the eye.
3. Scar colour is brown with a slight red undertone.
4. Rigid collodion is recommended to be used to create the scar effect.
Optional Details:
1. There are two scars creating a right angle located on the left cheek, one horizontal and one vertical scar. Each scar is approximately 0.5” (1.25cm) long.
Image URL: https://drive.google.com/file/d/1PWVoC3 … drive_link
2. Blue eye contacts.

Additional Images:
Image URL: https://drive.google.com/file/d/1oK8Tcb … drive_link
https://drive.google.com/file/d/1govmgA … drive_link
https://drive.google.com/file/d/1LL0pHs … drive_link

Outer Tunic:
Image URL: https://drive.google.com/file/d/1ZaRJaa … drive_link
Required Details:
1. Tunic is made from a fabric with a waffle weave and crinkle texture. A heavy weight cotton gauze type fabric is preferred, if a lighter weight fabric is used it must be doubled or lined.
2. Fabric grain/crinkle texture runs vertically on the main body and lengthways along the sleeves. On the collar band, it is parallel to the collar seam.
3. Fabric is dark brown in color, darker than the inner tunic and pants, and does not appear black.
4. Tunic is a left over right wrapover construction, with a seam at the waist between the torso and skirt sections, and no visible closure mechanism.
5. Tunic skirt reaches to mid-thigh in length and has a hem of approximately 1” (2.5cm) width.
6. Sleeves are bell styled and get larger as they progress down the arm. Left sleeve extends to the knuckles, with opening width at least one and a half times the wearer’s hand-width (tip of thumb to tip of pinky with hand spread out), and has a hem of approximately 1” (2.5cm) width. Right sleeve may be shortened and cuffed in order to be tucked neatly into the gauntlet.
7. Both sleeves have shoulder tucks that are 1.5-2” (4-5cm) deep.
8. A collar band approximately 2” (5cm) wide extends from the neck down the front edges of the tunic.
Optional Details:
1. The tunic has a lining in a matching colour. The recommended lining fabric is silk.
2. The collar band finishes at the waist seam.
3. Lower section of right sleeve is recommended to be constructed out of stretch material extending from the middle of the forearm to the wrist, making the gauntlet easier to wear. This section must not be visible when the gauntlet is worn.

Additional Images:
Image URL: https://drive.google.com/file/d/1faz860 … drive_link
https://drive.google.com/file/d/1tmR5b5 … drive_link
https://drive.google.com/file/d/1L_TYiW … drive_link
https://drive.google.com/file/d/1ge8v2n … drive_link
https://drive.google.com/file/d/18k3HqG … drive_link

Inner Tunic:
Image URL: https://drive.google.com/file/d/17ecAu3 … drive_link
Required Details:
1. Inner tunic is made from a textured lightweight fabric. A textured silk crepe is recommended.
2. Fabric is chocolate brown in color, lighter than the outer tunic and a similar color to the pants.
3. Tunic is a left over right wrapover construction, with no visible closure mechanism.
4. The inner tunic is only visible at the neckline and left sleeve. The left sleeve is fitted snug to the arm and extends to the wrist. The cuff is visibly ruched.
5. A collar band approximately 2” (5cm) wide extends from the neck down the front edges of the tunic, similar to the outer tunic.

Additional Images:
Image URL: https://drive.google.com/file/d/18k3HqG … drive_link

Cloth tabards:
Image URL: https://drive.google.com/file/d/1RGKZPN … drive_link
Required Details:
1. Cloth tabards made out of the same fabric as the outer tunic, with the crinkle texture of the fabric running parallel in direction with tabards.
2. Cloth tabards sit under the leather tabards.
3. Cloth tabards extend to the same length as the outer tunic at the front and end under the obi at the back.
4. Width of cloth tabards is approximately the same as leather tabards, from outer tunic collar seam to no more than 1” (2.5cm) past edge of shoulder tuck, and width is consistent along the length of cloth tabards.
5. Cloth tabards form a Y shape in the front where the lower portion of the Y hangs below the obi and a V shape without crossing in the back.
Optional Details:
1. Cloth tabards may have a waist seam that must be hidden under the obi.

Additional Images:
Image URL:
https://drive.google.com/file/d/1pJZQZ2 … drive_link
https://drive.google.com/file/d/1YCNvC3 … drive_link

Leather Tabards:
Image URL: https://drive.google.com/file/d/1RGKZPN … drive_link
Required Details:
1. Tabards made out of dark brown smooth grain leather (or leather-like material). Color must be darker than outer tunic but not black.
2. Leather tabards are lined with the same material. The edges are closed seams with no topstitching, and there are seams across the shoulders.
3. Leather tabards are the same length at the front and back. They extend to no more than 2” (5cm) past the outer tunic hem and do not extend past the knees.
4. Width of cloth tabards extends from outer tunic collar seam to no more than 1” (2.5cm) past edge of shoulder tuck, and width is consistent along the length of leather tabards.
5. Leather tabards form a Y shape in the front where the lower portion of the Y hangs below the obi.
Optional Details:
1. Preferred material is smooth grain sheepskin leather.
2. Leather tabards may have a waist seam that must be hidden under the obi.

Additional Images:
Image URL: https://drive.google.com/file/d/1rrb9eR … drive_link

Obi:
Image URL: https://drive.google.com/file/d/1MVPuYX … p=drivesdk
Required Details:
1. Obi made out of the same fabric as outer tunic and cloth tabards.
2. Fabric is cut on the bias, allowing the fabric grain/crinkle texture to run diagonally, rather than horizontally, across the obi.
3. Obi extends approximately 2” (5cm) above and below the leather belt.
4. Obi closure system must not be visible.
Optional Details:
1. Folds and wrinkles which match screen-used obi are optional, and may be hand-sewn into position along obi midline.

Belt:
Image URL: https://drive.google.com/file/d/1KfUq4Y … p=drivesdk
Required Details:
1. Dark brown belt (lighter than leather tabards) made of leather or leather-like material, must match boots in color or be as close as possible.
2. Belt consists of a wide inner belt which is approximately 2.25″ (6cm) wide, and a narrow outer belt which is approximately 0.75″ (2cm) wide.
3. The narrow outer belt is held in place on the wide outer belt by four pairs of silver button studs (such as Sam Browne studs) which are equally spaced around the belt. Each pair of studs is positioned so that the narrow outer belt passes between them.
4. Both belt straps have incised or tooled lines running parallel to the edges. Each side of the wide inner belt has a line approximately ⅛” (3mm) from the edge and a line approximately ⅜” (1cm) from the edge, for a total of four lines. Each side of the narrow outer belt has a line approximately ⅛” (3mm) from the edge, for a total of two lines. Stitching and/or stamped patterns are not permitted.
5. The narrow outer belt has a buckle at the centre front. The buckle is a silver rectangular side release (or snap closure) buckle, approximately 1” (2.5cm) wide and 2” (5cm) long. The buckle is slightly asymmetrical, with the indents for the side release closure being offset to the right side so that the edge of the indent is roughly in line with the centre of the buckle. There is a keeper of the same width as the narrow belt to each side of the buckle.
6. The wide inner belt has no visible closure mechanism. The closure mechanism must be at the back and covered by a keeper of similar width as the wide belt. The narrow outer strap must also pass under the keeper.
9. Belt Accessory Arrangement (Center front to the right): belt buckle, narrow belt keeper, silver button stud set, silver food capsule, copper food capsule, ribbed leather pouch, gold food capsule, gunmetal food capsule, silver button stud set, brown rectangular box with centered gold button, wide belt keeper, reddish-brown ribbed box, silver button stud set, gunmetal food capsule, gold food capsule, copper food capsule, silver food capsule, covertec clip, silver button stud set and narrow belt keeper.
Optional Details:
1. Both belts may be made from smooth grain aged leather.
2. Keepers may have lines in the same style and position as their respective belts.

Additional Images:
Image URL:
https://drive.google.com/file/d/1eaNlKG … drive_link
https://drive.google.com/file/d/1jwk-BK … drive_link
https://drive.google.com/file/d/14bFVPD … drive_link

Pouches and Boxes:
Image URL: https://drive.google.com/file/d/14bFVPD … drive_link
https://drive.google.com/file/d/1OsXIsC … drive_link

Required Details:
1. The belt has one leather pouch and two resin boxes worn on it.
2. The pouch is made from brown leather or leather-like material, constructed with side gussets and a rounded flap. The main body and flap of the pouch has a series of incised or tooled vertical lines, and a hidden snap or magnetic closure. It is positioned on the right hip between food capsules. Pouch is approximately twice as tall as the wide inner belt and half as thick as the resin cast boxes, roughly 5 ⅜” (13.5cm) tall and 3” (7.5cm) wide.
3. One box is smooth, reddish-brown, and rectangular in shape, made from cast resin or a similar hard material. There is a recessed rectangle occupying the centre third of the front, with a horizontally centred gold elliptical button approximately two thirds of the way up. It is positioned on the back, on the right side of the rear keeper. The box is approximately 2 ⅜” (6cm) tall and 4 ¼” wide (11cm).
4. One box is wide, rectangular, and reddish-brown, made from cast resin or a similar hard material. The central front section is recessed and diagonally fluted, with a curved flap-like section that comes over the top of it. The flap section has two small brown buttons on each side of the front. The box is positioned on the back, on the left side of the rear keeper. It is slightly larger than the smooth brown box, approximately 3.5” (9cm) tall and 4.5” (11.5cm) wide.

Additional Images:
Image URL:
https://drive.google.com/file/d/1eaNlKG … drive_link
https://drive.google.com/file/d/1jwk-BK … drive_link

Food Capsules:
Image URL: https://drive.google.com/file/d/1kBIFaM … drive_link
Required Details:
1. Eight food capsules that are cylindrical in shape and metallic with matte finish in appearance: two copper, two gold, two silver and two gunmetal.
2. Four food capsules located on left hip behind covertec clip (front to back): one silver, one copper, one gold and one gunmetal.
3. Four food capsules located on right hip, two on either side of leather pouch (front to back): one silver and one copper, one gold and one gunmetal.
4. Food capsules clip over the top edge of the wider inner belt.
Optional Details:
1. The original capsules were made from Staedtler Liquid Roller Point Pen lids with a hemisphere glued into the opening.

Covertec Clip:
Image URL: https://drive.google.com/file/d/1ZaRJaa … drive_link
Required Details:
1. Black plastic covertec clip.
2. Worn on the left hip between the buckle and the four food capsules.
3. Covertec clip clips over top edge of the wider inner belt.

Pants:
Image URL: https://drive.google.com/file/d/1ZaRJaa … drive_link
Required Details:
1. Loosely fitted (slightly baggy) pants that are chocolate brown in color, recommended fabric is lightweight cotton with twill texture in a vertical direction.
2. Pants must match or be as close as possible to inner tunic in color and be lighter than outer tunic.
3. Pants are tucked into boots.
4. No visible pockets or closures.

Additional Images:
Image URL:
https://drive.google.com/file/d/1RGKZPN … drive_link

Right Gauntlet:
Image URL: https://drive.google.com/file/d/1vVxEQW … drive_link
Required Details:
1. Made of dark brown leather or leather-like material, matching or slightly lighter than leather tabards in color.
2. Gauntlet covers approximately three quarters of the forearm and is closely fitted to wearer’s arm.
3. Forearm section made up of three padded sections which run around the circumference of the gauntlet with four lines of stitching between each padded section. Each row of stitching is approximately ⅛” (3mm) apart from the next.
4. Three rubber straps centered evenly over each padded section, each is approximately 1.5” (3.5cm) wide and has approximately 7 ribs.
5. Each strap must be long enough to go from one side of buckle around the circumference of the gauntlet to the other side of the buckle via the underside of the arm and is held in place with a silver metal buckle positioned on top side of arm, ends of straps pass through the D-ring shaped ends of the buckles and ends are not visible.
6. Back of the hand has approximately 9 ribbed channels within a pentagon-shaped area with raised sewn channels which run horizontally across back of hand, from the knuckles to the wrist. Each channel is sewn ¼” (6mm) apart.
Optional Details:
1. Preferred material is smooth grained sheepskin leather.
2. The original screen-used buckles were from a pair of Sidi motorcycle boots.
3. Tarnished weathering on buckles.
4. The opening of the glove has a single closing stitch along the edge.
5. External finger stitching details may be included.

Additional Images:
Image URL: https://drive.google.com/file/d/1z37DUs … drive_link
https://drive.google.com/file/d/1bv3vQt … drive_link
https://drive.google.com/file/d/1kal0z6 … drive_link
https://drive.google.com/file/d/1P3JJLU … drive_link
https://drive.google.com/file/d/1M2yEb5 … drive_link

Boots:
Image URL: https://drive.google.com/file/d/1ZaRJaa … drive_link
Required Details:
1. Dark brown boots made of leather or leather-like material with medium gloss shine and a rounded toe, must match belt in color or be as close as possible.
2. Heel is approximately ¾” (3cm) wide.
2. A spat section on the front of the boots extends to just below the knee and does not cover it.
4. The spat portion does not extend past the sides of the boots.
5. The spat portion of the boot is made up of vertical ribbed sections of equal width and should be approximately 1” (2.5cm) taller than the boot.
7. There are two thin straps of the same material at the top of the boot spat portion and one strap at the bottom by the ankle. Each strap is 1” (2.5cm) wide.
8. The top two straps have two keepers positioned on the outside leg and the strap ends must be covered by the last keeper. The bottom strap has one keeper on the outside leg, the end of the strap must be covered by the keeper.
9. There are three loops along the rear seam of the boots that hold the straps in place. Straps must be fitted to the leg, without slouching or sagging.
10. No visible zippers or laces. Zippers or laces may be located under the spats.
Optional Details:
1. Three ridge details on the back heel of the boots.
2. The spat is made up of approximately six vertical ribbed sections of equal width.
3. Lug style sole design is recommended.

Additional Images:
Image URL: https://drive.google.com/file/d/1-lsDkK … drive_link
https://drive.google.com/file/d/15PiZ– … drive_link

Lightsaber:
Image URL: https://drive.google.com/file/d/1hSlOfv … drive_link  (Source: Propstore Auction)
Required Details:
1. ROTS Hero lightsaber hilt.
2. Black raised hand grips are equally spaced around the circumference of the pommel end, running vertically along lightsaber.
3. Black covertec wheel at pommel end, opposite side to control box.
4. Control box with gold detailed button on top and a gold rounded lever on the side.
5. Center band detail around circumference in line with control box.
4. Nickel colored plating with chrome appearance to metal.
5. Graflex emitter end.
6. Button colors match references.
7. The lightsaber may be a static prop (hilt-only).
8. No toy sabers, no Ultimate FX short saber.
Optional Details:
1. Attached blade(s), LED lights, and sound effects, are allowed but not required.
2. If bladed, must be blue.
3. Master Replicas, Hasbro, or similar models are allowed.
Additional Images:
Image URL: https://drive.google.com/file/d/1n48kSn … drive_link (Source: Propstore Auction)

Optional Items

Outer Robe:
Image URL: https://drive.google.com/file/d/1RGKZPN … drive_link
Required Details:
1. Outer robe is dark brown in color and a shade lighter than the outer tunic.
2. Outer robe is made of wool or wool-like material.
3. Outer robe is floor length and should reach the ground, should not be longer than floor length.
4. Sleeves are wide, approximately three hand widths wide.
6. No visible closures.
7. Hood is rounded in shape and large in size.
8. When down, the hood should hang over the edge of the shoulders and extend to mid-back.

Additional Images:
Image URL:
https://drive.google.com/file/d/14r-Nr6 … drive_link
https://drive.google.com/file/d/13dzwcs … drive_link
https://drive.google.com/file/d/1WQXDy6 … drive_link

Alternate variation: Anakin Skywalker – EPISODE III (Nightmare Scene)
-Head
-Outer Tunic (see below)
-Cybernetic Right Arm (see below)
-Pants
-Shoes (see below)

Outer Tunic:
Image URL: https://drive.google.com/file/d/1ps6hhE … drive_link
Source: screen-cap.com
Required Details:
1. Outer Tunic may hang open or be wrapped loosely left side over right side.
2. Closure mechanisms must not be visible.
3. Sleeves must be one and a half (1.5) handwidths wide at opening.

Additional Images:
Image URL: https://drive.google.com/file/d/1xINPjk … drive_link
Source: screen-cap.com
Image URL: https://drive.google.com/file/d/1OQQlwh … drive_link
Source: screen-cap.com
Image URL: https://drive.google.com/file/d/1hR9DrH … drive_link
Source: cap-that.com
Image URL: https://drive.google.com/file/d/1-tPQ2Y … drive_link
Source: cap-that.com

Cybernetic Right Arm:
Image URL: https://drive.google.com/file/d/1y0-h2T … drive_link
Source: screen-cap.com
Required Details:
1. Black elbow length base glove with plates and detailing.
2. Finger, hand and armplates are 3D/Resin printed OR Cintra.
3. Plates are metallic gold.
4. Wires run underneath plates.
5. Wires may be physical cording or painted to appear as such.

Additional Images:
Image URL: https://drive.google.com/file/d/1EOJoK0 … drive_link
Source: screen-cap.com
Image URL: https://drive.google.com/file/d/1g52-wh … drive_link
Source: screen-cap.com
Image URL: https://drive.google.com/file/d/1Y2jVyz … drive_link
Source: Wookiepedia – Mechno Arm
Image URL: https://drive.google.com/file/d/1FEo6DK … p=drivesdk
Source: Star Wars Complete Saga Visual Dictionary

Shoes:
Image URL: https://drive.google.com/file/d/1H6PQbW … drive_link
Source: screen-cap.com
Required Details:
1. Costumer may be barefoot or wear flesh tone ballet slippers.

Additional Images:
Image URL: https://drive.google.com/file/d/1R3fh_B … drive_link
Source: screen-cap.com
Image URL: https://drive.google.com/file/d/1GHkflP … drive_link
Source: screen-cap.com

 

Costume Resources:
Reference Photo Gallery:
https://drive.google.com/drive/folders/ … W4Fltop6sb

Costume Tutorial: https://www.forum.rebellegion.com/forum … 11#1237111

Robotic Limb Build Thread: https://www.forum.rebellegion.com/forum … p?t=119238

Author: Ashlyn_Dubreas, Dangams , hiraethsolo (Robin Alexander)

 

Revision Date: 4th February 2026

PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.