CHARACTER DESCRIPTION
Han Solo, also known as Cadet 124-329 when serving as an Imperial cadet, was a human male smuggler who became a leader in the Alliance to Restore the Republic and an instrumental figure in the defeat of the Galactic Empire during the Galactic Civil War. He hailed from Corellia and became a smuggler in the employ of Jabba the Hutt, even completing the Kessel Run in just twelve parsecs with his prized ship, the Millennium Falcon. [Wookieepedia]
Front: https://drive.google.com/file/d/1Waj0RhnMEPQaejqcCPBK_w0r13sym67N/view?usp=sharing
Back:
https://drive.google.com/file/d/1k1k9aJcABXEKaNFn2pyA_NylFqYJS4F0/view?usp=sharing
REQUIRED ITEMS:
Jacket
URL: https://drive.google.com/file/d/1BhnJX6TPXslE25w60e2ORebvqCs_I37i/view?usp=sharing
Required Details
- Tan to dark tan suede, black or midnight blue suede panels at the shoulders and contrast stitching.
- The jacket is waist length.
- The front of the jacket features:
- a placket approximately 1.5 ” (38 mm) wide
- a panel directly next to the placket approximately 1.5” (38 mm) wide featuring a pen pocket, 5.5″ (14 cm) long and a hem approximately 2.75” (7 cm) from the bottom,
- The pen pocket has a mitered corner and a hem approx. 1.75” (45 mm) from the top
- There is a rectangular stitch detail (1.25″ x.5″/ 32 x 13 mm) about 1/4” (6mm) above the pen pocket overlapping the placket
- Another panel divided horizontally at the shoulder into a black or midnight suede blue suede shoulder patch.
- The lower half of the panel features an inset slash pocket with an approximately 1” (25 mm) welt.
- The left front panel features a greeblie or id badge cut-out. (1.5″ x 2.625″/ 38 x 67 mm)
- There are two rectangular stitch details, on just above the hem line and the other about 5/8” (33 mm) of below the bottom of the pen pocket (1.25″ x.5″/ 32 x 13 mm)
- Seams are topstitched with lighter tan contrast stitching
- The jacket has a mandarin collar approximately 2” (5 cm) in length.
- The Jacket features a roughly square 3″ (76 mm) utility pocket with a 2″ (5cm) flap on the right arm.
- The sleeve features a topstitched back seam and approximately 4” (10 cm) cuffs and an angled seam detail on the underside of the sleeve.
- The back of jacket has details:
- A black suede yoke
- Tucks on either side of the back with adjustable buckles/straps
- A center seam
- A waistband approximately 3” (76 mm) from the bottom
Additional Images:
https://drive.google.com/file/d/16yksVQNaROGPmURKTFOFzANNgxz_HNOH/view?usp=sharing
https://drive.google.com/file/d/1Z831sNTVtKZH3o3IOlZ5eDg3hnsdl8iK/view?usp=sharinghttps://drive.google.com/file/d/1zAqAnq4QOO78RjssaKxi0R9BMg8DEP3x/view?usp=sharing
Shirt
URL: https://drive.google.com/file/d/1__KsJUF3UAPp-NRJmq8_aAHlcXlI336r/view?usp=sharing
Source: kman – ArcLight Hollywood Costume Display
Required Details
- Faded black, charcoal, or faded gray slate blue smuggler style long-sleeved shirt worn tucked into the pants.
- Front has a rectangular bib with seams on the bottom and both sides which continue down to bottom of hem.
- The corners on the upper sides of the bib open diagonally, creating flaps when open.
- The inside of the top panel of the bib has the appearance of darker black contrast material than the shirt.
Optional Detail:
-Shirt has mandarin collar.
Pants
URL: https://drive.google.com/file/d/1iAFyY6BL44mqOloe-vcaVm_TSP2MdM44/view?usp=sharing
Source: kman – ArcLight Hollywood Costume Display
Required Details
- Dark navy to midnight blue pocketless fitted pants with accurate bloodstripes:
- Printed or heat transfer vinyl, rubber, or similar
- Brick red in color with a dark brown or black wash to darken them.
- The pants are a wool material or give the appearance of wool.
- Bloodstripes are about 1″ (2.5 cm) wide by 1/4″ (6 mm) high, with about 1/8″ (3 mm) of space between stripes.
- Bloodstripes are applied to a strip of material and then applied to the pants rather than applied directly.
Belt
URL: https://drive.google.com/file/d/1Yq-wv5gY3BYaEIFeBV3_Lk2-a8gDZWpx/view?usp=sharing
Source: kman – ArcLight Hollywood Costume Display
Required Details
- Belt is made of black leather or leather-like material
- Belt is punctured entirely with columns of three holes and each column is spaced approximately 0.75” (2 cm) apart
- Belt has a two-pronged buckle, black in color.
Boots
URL: https://drive.google.com/file/d/1edGDsAfhCOQI-iMFVJ7f3FvZ4r_88UyL/view?usp=sharing
Required Details
- Black equestrian-type knee-high boots with no visible zipper on the boots.
- The boots feature a buckle on the outside of the boot extending from the back to the front.
- If a zipper is present, it is subtle and located on the inside of the boot.
Additional Images:
https://drive.google.com/file/d/1F9aws6D10kuCjM0Vd7WPT8-507LXIv0B/view?usp=sharing
Source: kman – ArcLight Hollywood Costume Display
Gunbelt
Image: https://drive.google.com/file/d/1W_ZUabHVxrWS_GPeG39owpR6SOjckmU5/view?usp=sharing
Source: Solo: A Star Wars Story
Required Details
- Leather gunbelt with rivets (buttons).
- Features three small utility pockets and circular leather holder for tools along one side of the front buckle, with one “closed top” pocket on the non-holster side of the buckle, droid caller holder, and metal circular disk
- Gunbelt includes correct tools (2 power cells and silver “sparklet”/CO2 cylinder)
- Gunbelt includes proper droid caller (Kobold flash style)
- “Six-sided” belt buckles, one in front and a second in the back
- Back buckle is more elongated than the front buckle
- Belt buckles are placed in center font and center back
- There are sets of four snaps (in rows of two) on either side of the buckle in the back
- Holster is uncapped
- Holster leg strap has a keeper
Additional Images:
https://drive.google.com/file/d/1QYvh1RRLJ5xxoNMYOsvkS6V8qWDhmIr6/view?usp=sharing
https://drive.google.com/file/d/1WaWkBFy0nbtDbkLdWJo8Pr0MbsDbIA4U/view?usp=sharing
Source: kman – ArcLight Hollywood Costume Display
Blaster
Image: https://flickr.com/photos/154476314@N03/28411073448/in/album-72157696514600834/
Source: Thomas Bunce – Solo Costumes TJB 108
Required Details:
- DL-44 style blaster, black blaster pistol with brown grips on handle
Hair
Item Image URL: https://drive.google.com/file/d/1Z831sNTVtKZH3o3IOlZ5eDg3hnsdl8iK/view?usp=share_link
Source:
Required Details
- Naturally occurring hair colors allowed (dirty blonde/brown recommended); if a wig is used it must be high quality and look like real hair
- Hair is parted
- No beards or moustaches
Additional Images
URL: https://drive.google.com/file/d/1k1k9aJcABXEKaNFn2pyA_NylFqYJS4F0/view?usp=share_link
Source:
Additional Image source gallery: https://drive.google.com/drive/folders/1RwzF6B3B8T3dQFtE8DbZpBtkJruZJ1Uw?usp=sharing