ahsoka tano cargo of doom

Ahsoka Tano – The Clone Wars (Cargo of Doom)

Aliens, ALL, Jedi, The Clone Wars

CHARACTER DESCRIPTION
Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Tano was involved in the defeat of the Separatist army on the planet Christophsis and was important to Republic efforts during the Battle of Teth. Along with Skywalker, Tano was instrumental in acquiring the Republic’s safe passage through Hutt Space, due to her part in rescuing the son of Jabba the Hutt, which ensured an alliance between the Republic and the Hutt clans. (Source: Wookieepedia)

Front Image
URL: https://drive.google.com/file/d/1Tz-W90oNEGnMmU_kahajZQ6t0Tc1kk5Y/view?usp=drive_link
Source: Wookieepedia.com

Back Image
URL: https://drive.google.com/file/d/1R9rnFxIp0RQqBDgIw-yPm6WuEHyeXvM7/view?usp=drive_link
Source: cap-that.com

Headpiece
URL: https://drive.google.com/file/d/1lS6UBntOd0B46G29QEJGzmoFpJO2oQIS/view?usp=drive_link
Source: cap-that.com
Required Details:
1. All of the wearer’s hair must be covered and hidden by the headpiece, no hair can be showing.
2. Front lekku end at the top of wearer’s breasts.
3. The headpiece is made from latex or latex-like material to give the appearance of skin.
4. If the headpiece is fabric based the fabric must be coated in latex or a similar material to give the skin like appearance.
5. Overall appearance must be smooth and not appear to be shiny, rigid, or hard.
6. The headpiece is painted white with blue stripes in a medium blue gray color.
7. Headpiece sits flush to the forehead.

Optional Details:
1. Multi-toned paint is recommended but not required.

Additional Images:
URL: https://drive.google.com/file/d/1lygotN4AvlCeaRsN0gwTAQFleUxRSCPe/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/1DdEULo3JpaXwDy71eELjGMq1l7CfUqaG/view?usp=drive_link
Source: cap-that.com

Akul Teeth/Padawan Braid
URL: https://drive.google.com/file/d/1lS6UBntOd0B46G29QEJGzmoFpJO2oQIS/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Along the edge of the headpiece, there are seven (7) total Akul teeth, there are six (6) total smaller ones with three (3) on each side and a larger one in the center.
2. Teeth are 6 small akul teeth are equal sided triangle pyramids, with the larger akul tooth being pointed teardrop/diamond shape.
3. Teeth sit flush against the headpiece and forehead and have no gaps.
4. Teeth are painted by one of the following colors: Silver, gold/brass, or silver/green.
5. From the center tooth, there are two (2) square pyramid beads with smaller beads between them.
6. After those two beads, the strand splits into two and goes between the montrals and over to the back of the headpiece ending where the back and front lekku separate on each side.
7. Padawan braid is only on the right side.
8. A single strand of round beads spaced out evenly along a thin smooth chain or wire (a large ball chain is acceptable).
9. At the bottom of the Padawan braid, there are two (2) total triangular pyramid beads.
10. The top pyramid bead is yellow and the bottom pyramid bead is red, in between them is a small blue bead, the points of the triangles face inwards towards one another and the blue bead between them.

Optional Details:
1. No padawan braid.
Color options: Silver, gold/brass, or a silver green; color must be the same as the one chosen for the Akul teeth.

Additional Images:
URL: https://drive.google.com/file/d/1BrXMdQ9nSvdooCj09WXcmoRC5W9KEftH/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/1JXGUKxQMnvCIz2uQmI-tu9i1HYD_KV3w/view?usp=drive_link
Source: cap-that.com

Skin:
URL: https://drive.google.com/file/d/1K8XQUOyTqmiBQ613Wks7xsy9WQHN8QkK/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Skin is orange with accurate white markings on the face.
2. White markings include:
– Two white diamonds on either side of the upper forehead.
– White markings above the eyes curve around the eye socket and are approximately where the eyebrow is.
– Cheek markings on both cheeks.
– White markings are symmetrical and clean.
– White markings must appear to be part of the face.
– No silicon markings allowed.
3. Eyebrows are to be covered and smoothed down so no hair texture is visible.
4. Makeup must have an overall smooth appearance.
5. Dark purple or dark brown lipstick.

Optional Details:
1. Maroon or brown nail polish.

Top
URL: https://drive.google.com/file/d/10c4HQdtr9JsSv1oWUq4mBR3yegUTzK8y/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Top is a maroon or dark red color.
2. Top has long sleeves and high collar.
3. Top is skin tight to the wearer.

Optional Details:
1. A bodysuit is acceptable instead of a separated top and leggings.
2. A zipper at the back of the neck is acceptable.

Note: If a separate top and leggings are chosen instead of a full bodysuit, the separation between the top and the leggings must not be visible and needs to be fully covered by the belt.

Additional Images:
URL: https://drive.google.com/file/d/1KrBkWuM77b6YjPXTQZATb2fTR–DFnXA/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/1-r9cr4LToU9wa0yHVp3xeGsZFP7ZZdvZ/view?usp=drive_link
Source: cap-that.com

Leggings
URL: https://drive.google.com/file/d/1yE-X13hlGx-6U4E4kZeNCT860L3oS6r7/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Leggings are a maroon or dark red color.
2. Leggings are form-fitting/skin tight to the wearer.
3. Leggings tuck into the spats and boots.
4. Waist band of leggings does not rise above the belt.

Optional Details:
1. Bodysuit is acceptable instead of separate top and leggings.

Note: If a separate top and leggings are chosen instead of a full bodysuit, the separation between the top and the leggings must not be visible and needs to be fully covered by the belt.

Additional Images:
URL: https://drive.google.com/file/d/1-r9cr4LToU9wa0yHVp3xeGsZFP7ZZdvZ/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/1BrXMdQ9nSvdooCj09WXcmoRC5W9KEftH/view?usp=drive_link
Source: cap-that.com

Belt
URL: https://drive.google.com/file/d/1CQLXzzz80Tm7warZQAkCTRZCAkGVR2Vj/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Clone trooper style belt.
2. Belt is white with gray weathering.
3. Belt is approximately 3 inches (7.5 cm) wide and segmented (or segmented-looking).
– Segments are approximately 1.75 inches (4.5 cm) wide.
4. There are two large belt boxes, one on each hip.
– Each box should extend approximately 1.5 inches (3.8 cm) above and below the belt, and be approximately 3 inches (7.5 cm) wide.
– Each box has an upsidedown U indent starting near the top edge and extending down approximately half the length of the box.
5. Thermal detonator is centered on the rear of the belt.
– Thermal detonator consists of a horizontal cylinder slightly thinner than the width of the belt itself.
– Detonator has no control buttons.
– Detonator has two (2) lines set in approx 1/4th of the way in from the edges. Lines may be recessed or painted on.

Additional Images:
URL: https://drive.google.com/file/d/1nmV_zggeX4_mT56uUjMj1fwNWzE8IlHw/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/18sR6vsJdXrOV6aAIwAtO4fISZct2hjZ9/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/1szOMJYiWwUk7PihZf8F0RnG-dpH9N94o/view?usp=drive_link
Source: cap-that.com

Tabard
URL: https://drive.google.com/file/d/1Q33y0M8VZb6Fig2QP9THKs-SVD06i6nE/view?usp=drive_link
Source: cap-that.com
Required Details:
1. A single elongated pentagon, made of leather or leather-like material.
2. Color is pale pink, with markings in a darker purple/magenta on it.
3. Top of tabard tucks under the belt and belt buckle.
4. Tabard top is slightly larger (no more than ½ inch or 1.3 cm) than the buckle on either side.
5. Must have an overall size and shape proportional to the wearer.
6. Markings consist of 3 diamond-like shapes on the center on the tabard starting at the belt buckle, each getting slightly bigger than the one above.
7. Two more diamond-like shapes angle from the center-bottom diamond shape towards the widest part of the tabard.
8. On sides of the tabard, there are 4 simple filigree style designs with the bottom point being between diamond shapes.

Bracers and Gloves
URL: https://drive.google.com/file/d/1suefIydRguhZSuxL-MQfWlJTIBR1eq4k/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Bracers are more red or lighter color than the bodysuit, and are made from leather or leather-like material.
2. Bracers slope from outside of the arm to a point on the inside of the arm just below the inner elbow.
3. They are centered on the arm and do not cover the elbow in any way. Outer layer ends at the wrist.
4. On the outside of the arm, there is another point made that is darker color than bracers and made from the same material as the bracers. This point is centered with the arm.
5. The bracers have 3 golden buckles.
6. Buckles are the same size and evenly spaced on the bracer.
7. Buckles are square with a bar across the middle.
8. Buckles have raised edge that extends slightly on middle bar.
9. The separate elbow covering is in the same color.
10. Visible seam down the middle of the inner arm.
11. Gloves are the same color as the bracers.
12. Gloves fully cover fingers and hands.
13. Gloves tuck under the bracers.

Optional Details:
1. If weathering is present, it is in a lighter color than the gauntlets and also have light gray/silver variations.

Additional Images:
URL: https://drive.google.com/file/d/1-r9cr4LToU9wa0yHVp3xeGsZFP7ZZdvZ/view?usp=drive_link
Source: cap-that.com

URL: https://drive.google.com/file/d/1hS8nPTo4WrpleekkgMT7ax2DfL4CTIkc/view?usp=drive_link
Source: cap-that.com

Boots and Spats
URL: https://drive.google.com/file/d/1fQzxnHrvj4v4P7QxRkLZ3cnON_y1M8Ab/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Spats are the same color and material as the bracers and gloves.
2. Spats start with a point below the wearer’s knee cap in the front.
3. Spats angle down from the point to the sides of the legs.
4. The back of spats are rounded curve that sits below wearer’s knee and curves down to meet angled side from the front of the spat.
5. There is a straight ridge from the top to the bottom of front of spats.
6. Spats are form-fitting and sit close to the boots.
7. The spats reach the kneecap and are closed with 5 golden buckles on the outside of the leg.
8. The buckles have the same “H” design as the bracers.
9. Boots with no heel are preferred but a low heel is acceptable.
10. Boots are the same color as the spats.
11. Square toe is recommended.

Optional Details:
1. If weathering is present it is in a lighter color than the gloves and also have light gray/silver variations.

Additional Images:
URL: https://drive.google.com/file/d/1qN0W4T3v90ggG1z9xi4Qt3DifgDsowar/view?usp=drive_link
Source: cap-that.com

Lightsaber:
URL: https://drive.google.com/file/d/1JVs7USAuCCBANKgeFNV8FzhvEQhACxdJ/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Silver colored lightsaber hilt.
2. The lightsaber may be a static prop (hilt-only).
3. Attached blade(s), LED lights, and sound effects, are allowed but not required.
4. If bladed, blade is green.
5. No toy sabers, no Ultimate FX short saber.

OPTIONAL ITEMS

Helmet
URL: https://drive.google.com/file/d/1oALJGGfZZ1HTUN6KnhA-X4oz_LkBt7d6/view?usp=drive_link
Source: cap-that.com
Required Details:
1. Large clear dome that fits over the head and montrals, and ends below the chin.
2. Collar ofthe helmet slopes down the chest.
3. Collar slopes up over the shoulders.
4. Collar has raised paneling details.
5. Collar has slanted red stripe details.

Additional Images
URL: https://drive.google.com/file/d/1Tz-W90oNEGnMmU_kahajZQ6t0Tc1kk5Y/view?usp=drive_link
Source: Wookieepedia.com

URL: https://drive.google.com/file/d/12SuPJ956OR3PLwjHcVP4UeBuj9kWCkog/view?usp=sharing

Costume Resources
Reference Photo Gallery – https://drive.google.com/drive/folders/1WZ9hUI1MCgggF-LnHngiuUAfOOWUuJJS?usp=drive_link