CHARACTER DESCRIPTION
Discovered as a slave on Tatooine by Qui-Gon Jinn and Obi-Wan Kenobi, Anakin Skywalker had the potential to become one of the most powerful Jedi ever, and was believed by some to be the prophesied Chosen One who would bring balance to the Force. A hero of the Clone Wars, Anakin was caring and compassionate, but also had a fear of loss that would prove to be his downfall. (Source: Star Wars Databank)
Front Image:
Image URL: https://drive.google.com/file/d/1vghVyf … drive_link
Back Image:
Image URL: https://drive.google.com/file/d/1sYjr3V … drive_link
Required Items
Face and Hair:
Image URL: https://drive.google.com/file/d/1sCSTS9 … drive_link
Hair:
Required Details:
1. Natural hair color only, medium brown is recommended.
2. Hair styled to match references. Hair parted on the right side of the head with curtain fringe going to the left. Hair part on the right side of head with fringe reaching from eyebrow to the left ear.
3. Hair at the back reaches down to the collar seam of outer tunic in length.
4. If the wearer is using a wig, all of the wearer’s natural hair must be covered by the wig. Wig must be high quality and look like real hair.
Face:
Required Details:
1. Face should be clean shaven in appearance.
2. Over the right eye, there is a scar that goes above the brow. Details given below.
Scar:
Required Details:
1. Scar positioned over the outer corner of the right eye and eyebrow.
2. Scar should extend from approximately half (0.5) an inch (approximately 1-1.5 cm) above the eyebrow to approximately one (1) inch (approximately 2.5 cm) below the eye.
3. Color should be brown with a slight red undertone.
4. Scar should match references in color, placement and length.
Optional Details:
1. Blue eye contacts are recommended but not required.
2. Rigid collodion is recommended to be used to create the scar effect.
Additional Images:
Image URL: https://drive.google.com/file/d/1vsScVO … drive_link
Outer Tunic:
Image URL: https://drive.google.com/file/d/1R4VLvc … drive_link
Required Details:
1. Outer tunic is made from a material that has a visible texture (i.e. linen).
2. Outer tunic is a dark brown or chocolate in color.
3. Long sleeves that are fitted but not skin tight to the wearer.
4. The end of the sleeves tucks into the gauntlets.
5. The hem of the outer tunic ends above the wearer’s knee and does not cover the boots.
6. The opening of the tunic is edged by a collar band approx. 2″ (5 cm) wide.
7. The opening of the tunic rests left over right with the left side ending under the tabards.
8. The “skirt” portion of the outer tunic has no visible openings with a slight “A-line” shape and does not cling to the hips/legs of the wearer.
Additional Images:
Image URL: https://drive.google.com/file/d/1t7c-Ub … drive_link
Image URL: https://drive.google.com/file/d/1my8Rk5 … drive_link
Inner Tunic:
Image URL: https://drive.google.com/file/d/1Sgdt9f … drive_link
Required Details:
1. Inner Tunic can be a full shirt or a dickie.
2. Inner Tunic is a reddish brown or dark cognac in color.
3. Color is a close match to that of the pants and is lighter than the outer tunic.
4. Collar ends at the jugular notch of the wearer.
5. Inner Tunic is collarless, neckline is round neck shaped and has no visible closures.
Tabards:
Leather Tabards:
Image URL: https://drive.google.com/file/d/1JfmqAK … drive_link
Required Details:
1. Very dark brown in color, made from leather or leather-like material.
2. Leather tabards are made from the same, or nearly the same, material and color as the gloves and gauntlets.
3. Material has no sheen and is not shiny.
4. Leather tabards are the width of the wearer’s shoulder and do not extend more than half (0.5) an inch (1-1.5 cm) past the wearer’s shoulder.
5. In the front, the leather tabards nearly touch at the belt, and past the belt.
6. In the back, the leather tabards touch or very slightly overlap at the belt and past the belt.
7. In the front, the leather tabards extend past the bottom of the outer tunic and does not extend past the top of the boots.
Optional Details:
Image URL: https://drive.google.com/file/d/1_OFr5K … drive_link
1. A rolled edge or piping on both edges of the leather tabards is recommended but not required.
Additional Images:
Image URL: https://drive.google.com/file/d/19pnpAC … drive_link
Image URL: https://drive.google.com/file/d/1cDUd62 … drive_link
Fabric tabards:
Image URL: https://drive.google.com/file/d/13erbG1 … drive_link
Required Details:
1. Fabric tabards are not visible on the inner edge of the leather tabards and extend approximately one (1) inch (approximately 2.5 cm) past the edge of the leather tabards at the shoulder.
2. This extension on the outer edge of the leather tabards tapers until they are just barely showing at the belt on the front and back.
3. Fabric tabards end under the Obi, and do not continue past the bottom edge of the Obi or belt.
4. Fabric tabards are made of the same material and color as the outer tunic and have a visible texture.
Note: Fabric tabards can also be done as a full pleat/tuck in the outer tunic, it does not have to be a separate piece but the overall look needs to be the same.
Additional Images:
Image URL: https://drive.google.com/file/d/1ETexce … drive_link
Image URL: https://drive.google.com/file/d/1yXjLXU … drive_link
Image URL: https://drive.google.com/file/d/1EkipTX … drive_link
Obi:
Image URL: https://drive.google.com/file/d/1Atu9bS … drive_link
Required Details:
1. Obi is made from the same material and in the same color as the Outer Tunic.
2. Obi extends past the top and bottom edges of the belt no more than one (1) inch (2.5 cm) on the top and no more than one (1) inch (2.5 cm) on the bottom.
Belt:
Image URL: https://drive.google.com/file/d/1qQykrq … drive_link
Required Details:
1. Belt is brown or cognac in color and made from leather or leather-like material.
2. Belt has a thinner strip centered on the wider strip and a nickel rectangular buckle detail in the center front of the belt.
3. Belt accessories order placement (Centre front to the right): belt buckle, silver food capsule, copper food capsule, tall ribbed pouch, wide belt box, wide rounded belt box, covertec clip.
Additional Images:
Image URL: https://drive.google.com/file/d/1-KEh_j … drive_link
Pouches:
Image URL: https://drive.google.com/file/d/1EwSt8Q … drive_link
Required Details:
1. Brown tall rectangular pouch in the same color as the belt. Pouch is made from the same material as the belt, leather or leather-like. The flap of this pouch has a ribbed or quilted texture. The pouch attaches to the smaller center strip of material on the main belt and is long enough to go past the belt approximately one (1) to one and a half (1.5) inches (2.5-4 cm), proportional to the wearer. The top of the pouch should not extend past the top of the belt.
2. The two (2) belt boxes, each one different shapes but are the same size and made from the same material and same color as the rest of the belt. Shapes of both belt boxes are made to match references.
Covertec Clip
Image URL: https://drive.google.com/file/d/1Ru2ULo … drive_link
Required Details:
1. Covertec clip is dark grey or black in color and should match references.
Food Capsules:
Image URL: https://drive.google.com/file/d/1Fz4dic … drive_link
Required Details:
1. The two (2) food capsules should be painted to be metallic in appearance, one (1) silver and one (1) copper in color.
Pants:
Image URL: https://drive.google.com/file/d/12gaVjU … drive_link
Required Details:
1. Close fitting pants or skin-tight leggings in a reddish brown or dark cognac color.
2. Color is close in color to that of the undershirt and is lighter than the outer tunic.
3. Pants tuck into the boots.
4. Pants should be opaque and not sheer.
5. No visible pockets.
Gloves and Gauntlets
Image URL: https://drive.google.com/file/d/1fVy0Pc … drive_link
Required Details:
1. Very dark brown gloves that closely fit the wearer’s hands.
Note: Gloves and gauntlets are separate pieces with the gloves tucked into the gauntlets and no skin is visible.
Right Gauntlet:
Image URL: https://drive.google.com/file/d/16jFzsB … drive_link
Required Details:
1. Very dark brown glove made from leather or leather-like material, matches the left gauntlet and leather tabards in color.
2. The bottom of the gauntlet covers the back of the hand of the wearer in a smooth curved shape and does not cover the knuckles.
3. External stitching is giving a quilted appearance of bands that are perpendicular to the length of the glove and are located between each metal buckle and across the back of the hand.
4. Quilted appearance should match references.
5. The top of the gauntlet ends before the bend of the arm at the upper portion of the forearm.
6. There are three (3) bands at the wrist, mid-forearm, and top of the glove. Each band is made of a wider piece of material with a smaller one lying on top.
7. Each band has one (1) silver buckle on the topside of the arm.
8. These bands are made of the same material as the rest of the gauntlet and each has a smaller thinner strip in the middle of the band.
Note: It is recommended that the buckles are made out of sintra in two parts. A slide buckle piece and then a long “Ï” shape piece. The long piece is then threaded through the buckle piece.
Additional Images:
Image URL: https://drive.google.com/file/d/1wZQUrt … drive_link
Image URL: https://drive.google.com/file/d/1w93_HS … drive_link
Left Gauntlet:
Image URL: https://drive.google.com/file/d/1VY0pF2 … drive_link
Required Details:
1. Very dark brown glove made from leather or leather-like material, matches the right gauntlet and leather tabards in color.
2. The bottom of the gauntlet covers the back of the hand of the wearer in a smooth curved shape and does not cover the knuckles.
3. The top of the gauntlet ends before the elbow bend of the arm at the upper portion of the forearm.
4. There is a thin strip of material at the wrist of the left gauntlet.
5. There are two slightly wider strips of material towards the top of the gauntlet at the widest part of the wearer’s forearm.
Optional Details:
Image URL: https://drive.google.com/file/d/1CHSSGv … drive_link
1. If present, compad is located on the top of the left gauntlet, positioned directly above the wrist strap.
2. Compad is a long oval shape that is painted a gunmetal grey or black color closely matching the base gauntlet, the two (2) circular buttons on the compad are light gold in color.
3. Compad should match references.
Additional Images:
Image URL: https://drive.google.com/file/d/1EFCpM- … drive_link
Image URL: https://drive.google.com/file/d/18B6Ixi … drive_link
Boots:
Image URL: https://drive.google.com/file/d/1WPrcUH … drive_link
1. Brown boots made of leather or leather-like material.
2. Boots can be one piece or a boot and a spat. If a boot and a spat, the boots must tuck into the spats and the top of the boots cannot show.
3. The front of the boots at the top does not cover the wearer’s knee and ends right below the knee.
4. In the back, the spat portion ends below the front at the upper portion of the calf.
5. The spat portion of the boot is made of many vertical strips of material.
6. At the top, strips are wider than the ankle, are evenly spaced and proportional to the wearer.
7. The spats are well fitted to the wearer.
8. There are two (2) thin bands of the same material at the top of the boot spat portion and one (1) strip at the bottom by the ankle.
Additional Images:
Image URL: https://drive.google.com/file/d/1cLJSjY … drive_link
Image URL: https://drive.google.com/file/d/1nuKqHZ … drive_link
Image URL: https://drive.google.com/file/d/1Mfy_Df … drive_link
Optional Items
Lightsaber:
Image URL: https://drive.google.com/file/d/1Rg-3M_ … drive_link
1. Character accurate lightsaber.
2. Hilt only is allowed and should match the character references.
3. ROTS Hero lightsaber hilt. Master Replicas, Hasbro or costume build lightsaber matching that are used in ROTS are accepted. ATOC hilt is not accepted.
4. Black hand grips.
5. Black covertec wheel at pommel end, opposite side to control box.
6. Nickel colored plating.
7. Graflex emitter end.
8. Button colors match references, one (1) silver and one (1) copper.
9. The lightsaber may be a static prop (hilt-only).
10. No toy sabers, no Ultimate FX short saber.
Optional:
1. Attached blade(s), LED lights, and sound effects, are allowed but not required.
2. If bladed, must be blue.
Outer Robe:
Image URL: https://drive.google.com/file/d/1FF8SFe … drive_link
1. Outer robe is dark brown in color and a shade lighter than the outer tunic.
2. Outer robe should be made of wool or wool-like material.
3. Outer robe is floor length and should reach the ground, should not be longer than floor length.
4. Outer robe should be proportionate to wearer.
5. Sleeves are wide, approximately three (3) hand widths wide.
6. No visible closures.
7. Hood is rounded in shape and large in size.
8. When down, the hood should hang over the edge of the shoulders and reach to middle of back.
Additional Images:
Image URL: https://drive.google.com/file/d/1Acib4L … drive_link
Image URL: https://drive.google.com/file/d/1PnPKsC … drive_link
Image URL: https://drive.google.com/file/d/1FF8SFe … drive_link
Costume Resources: Reference Photo Gallery – https://drive.google.com/drive/u/1/fold … ijmNRbm7xG
Author: Ashyln_Dubreas
Uploaded: Februray 13th 2026
PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.