CHARACTER DESCRIPTION
Discovered as a slave on Tatooine by Qui-Gon Jinn and Obi-Wan Kenobi, Anakin Skywalker had the potential to become one of the most powerful Jedi ever, and was believed by some to be the prophesied Chosen One who would bring balance to the Force. A hero of the Clone Wars, Anakin was caring and compassionate, but also had a fear of loss that would prove to be his downfall. (Source: Star Wars Databank)
Front Image:
Image URL: https://drive.google.com/file/d/1NFQ5oG … drive_link
Back Image:
Image URL: https://drive.google.com/file/d/1a5Rabh … drive_link
Required Items
Face and Hair:
Image URL: https://drive.google.com/file/d/1f1_kts … drive_link
Hair:
Required Details:
1. Natural hair color only, medium brown is recommended.
2. Hair styled to match references. Hair parted on the right side of the head with curtain fringe going to the left.
3. Hair at the back should be cropped short and styled to appear messy.
4. If the wearer is using a wig, all of the wearer’s natural hair must be covered by the wig.
Face:
Required Details:
1. Face should be clean shaven in appearance.
2. Over the right eye, there is a scar that goes above the brow. Details given below.
Scar:
Required Details:
1. Scar positioned over the outer corner of the right eye and eyebrow.
2. Scar should extend from approximately half (0.5) an inch (approximately 1-1.5 cm) above the eyebrow to approximately one (1) inch (approximately 2.5cm) below the eye.
3. Color should be brown with a slight red undertone.
4. Scar should match references in colour, placement and length.
Optional Details:
1. Rigid collodion is recommended to be used to create the scar effect.
2. Blue eye contacts are recommended but not required.
Armor:
Note: The Rebel Legion does not accept EVA foam armor. If armor has EVA foam as a component, it must be finished with fiberglass or other applied method, so it does not look like EVA foam, and has longevity of wear.
Required Details:
1. All armor pieces are made from a rigid material, 3d printed PLA plastic and sintra are the recommended materials.
2. All armor is a dark grey in color with both darker and lighter weathering patterns matching references. Details on weathering given below.
Chest:
Image URL (front): https://drive.google.com/file/d/1yJP1GH … drive_link
Image URL (back): https://drive.google.com/file/d/1GWJMBw … drive_link
Required Details:
1. Chest armor is close fitting to the collar of the wearer but not skin tight, extends to mid sternum in the front and mid back in the back.
2. Chest armor front is made up of a total of seven (7) segmented pieces.
3. Armor consists of three (3) raised segments on either side of the wearer’s neck and one (1) indented segment at the center of the wearer’s chest.
4. Backside of the chest armor is made up of a total of seven (7) pieces
5. Backside of the center segment makes an “I” shape matching references.
6. End segments closest to the shoulder armor flares up slightly outward from the wearer’s natural shoulder.
7. Chest Armor has a distinct slightly raised collar/ring shape around the collar that matches references.
8. Weathering is created by paint that has worn away at various stages. The weathering is various shades of light and dark grey. Weathering should match references.
Shoulders:
Image URL (left): https://drive.google.com/file/d/1aeegCl … drive_link
Image URL (right): https://drive.google.com/file/d/1bxOAdy … drive_link
Required Details:
1. Shoulders are not connected to the collar armor.
2. Overall shape of the shoulder armor matches references. It has a slight curve as the shoulder and resembles the shape of a seashell.
3. Dark red Jedi symbol painted centred on the left shoulder piece, which is dark grey in color, matching references.
4. Jedi Symbol has a grey weathering to match the armor.
5. Weathering on the shoulder pieces consists of cracks, scratches and dents in varied locations. The right shoulder piece has cracks along the top edge at back, various dents and scratches scattered over the surface. The left shoulder piece has cracks along the top front edge and a horizontal dent directly above the point of the Jedi symbol. Weathering should match references.
Optional Details:
1. Jedi symbol can be slightly recessed or debossed into the shoulder piece.
Outer Tunic:
Image URL: https://drive.google.com/file/d/1a74khs … drive_link
Required Details:
1. Navy blue fabric that has visible texture.
2. Linen, heavy pile velvet, or heavy pile suede (faux suede) are the recommended fabrics. Penne velvet and other shiny velvet fabrics not permitted.
3. The outer tunic is a vest sleeveless style that ends just above the wearer’s knees and does not cover the top of the boots.
4. In the front of the outer tunic, the front is done in a V neckline that shows the inner tunic, the neckline closes just above the belt.
5. The sides of the outer tunic are open, allowing the under tunic to show, the side seams close just above the belt.
6. A few inches/several centimeters below the belt, proportional to the wearer, the front splits open again allowing the under tunic to show at a rest position.
7. The front of the tunic is longer than the sides with the center front split making a sharp angle.
8. The bottom hem must be a smooth transition from the side seams to the center front split.
9. In the back of the tunic, the center front split is mirrored with the same sharp angles, with the split starting below the belt, proportional to the wearer, the bottom hem having a smooth transition, and the center back being longer than the side seams.
Additional Images:
Image URL: https://drive.google.com/file/d/1KdaKhq … drive_link
Inner tunic:
Image URL: https://drive.google.com/file/d/1PrKDrj … drive_link
Required Details:
1. Burgundy, maroon, or reddish brown in color that has visible texture.
2. Linen or knit fabrics with minimal stretch are the recommended fabrics.
3. Inner tunic has long fitted sleeves and goes into a skirt that ends above the side seam of the outer tunic so that it does not show at the hem.
4. Inner tunic has no visible collar.
Additional Images:
Image URL: https://drive.google.com/file/d/1a74khs … drive_link
Belt:
Image URL: https://drive.google.com/file/d/1G1n-rj … drive_link
Required Details:
1. Belt is a dark brown in color and made from leather or leather-like material.
2. Belt is made to match references with a thinner strip centered on the wider strip and a silver rectangular buckle detail in the center front of the belt.
3. Belt closure in the back is allowed and must be covered by a belt closure cover.
4. Belt accessories order placement (Centre front to the right): belt buckle, gold food capsule, gold food capsule, tall brown pouch (right), tall brown pouch (left), covertec clip.
Additional Images:
https://drive.google.com/file/d/1ovBMTo … drive_link
https://drive.google.com/file/d/1xfi5tr … drive_link
Pouches:
Image URL: https://drive.google.com/file/d/1zkzuEr … drive_link
1. There are two (2) pouches in a slightly lighter brown than the belt, they’re made from the same material as the belt: leather or leather-like.
2. The pouches attach at the smaller center strip of material on the main belt and are long enough to go past the belt approximately 1-1.5 inches (approximately 2.5-4 cm), proportional to the wearer. The pouches are each approximately two and a half (2.5) inches (approximately 4 cm) wide.
3. One (1) Pouch is on the left side of the belt, next to the covertec clip, and one (1) pouch is on the right side of the belt, next to the food capsules.
Covertec Clip:
Image URL: https://drive.google.com/file/d/1XSJCai … drive_link
1. Covertec clip or similar present on the belt on the left side of the belt.
2. Covertec can be either brown or black in color.
Food Capsules:
Image URL: https://drive.google.com/file/d/1NcZ2fY … drive_link
1. Two (2) gold food capsules on the front right side of the belt.
Pants:
Image URL: https://drive.google.com/file/d/1nw2CDd … drive_link
Required Details:
1. Close fitting pants or skin-tight leggings.
2. Burgundy, maroon, or reddish brown in color that has visible texture.
3. Linen or knit fabrics with minimal stretch are the recommended fabrics.
4. Color is a close match or darker than the inner tunic.
5. Pants tuck into the boots.
6. Pants must be opaque and not be sheer.
7. No visible pockets.
Additional Images:
Image URL: https://drive.google.com/file/d/1eMmcLr … drive_link
Gloves and Gauntlets
Image URL: https://drive.google.com/file/d/1LRJibx … drive_link
Required Details:
1. Both gloves and gauntlets should be properly fitted to the wearer’s hands and forearms.
Note: The gloves and gauntlets are separate pieces. Where they separate the gloves must tuck into the gauntlets and no skin is visible. Velcro or press stud/snap is recommended to secure the flap of the gauntlet section to back of the glove section.
Right Gauntlet:
Image URL: https://drive.google.com/file/d/1siJMp8 … drive_link
Required Details:
1. Dark grey or black glove made from leather or leather-like material.
2. The bottom of the gauntlet covers the back of the hand of the wearer in a smooth curved shape and does not cover the knuckles.
3. The top of the gauntlet ends before the bend of the arm at the upper portion of the forearm.
4. There are three (3) bands at the wrist, mid-forearm, and top of the glove.
5. The bands are made of the same material as the rest of the gauntlet and each has a smaller thinner strip in the middle of the band.
6. Each band has two (2) rectangular “buckle” details, the buckle is smooth in a brass or gold color that is metallic but not shiny. The buckles get smaller from top to bottom and should be in proportion to the wearer. Each band has one (1) buckle on the outside arm and one (1) buckle on the inside arm.
7. The buckles at the wrist are approximately one (1) inch by one and a half (1.5) inches (approximately 2.5 cm by 4 cm) in size.
8.The buckles at mid forearm are approximately one and a quarter (1 ¼) inches by one and three quarters (1 ¾) inches (approximately 3 cm by 4.5 cm).
9. The buckles at the elbow are approximately one and a half (1.5) inches by two (2) inches (approximately 4 cm by 5 cm).
Additional Images:
Image URL: https://drive.google.com/file/d/1H4-bZm … drive_link
Image URL: https://drive.google.com/file/d/1FY44c9 … drive_link
Left Gauntlet:
Image URL: https://drive.google.com/file/d/1TKb1zt … drive_link
Required Details:
1. Dark grey or black glove section made from leather or leather-like material.
2. Dark brown gauntlet section made from leather or leather-like material. Should match the belt in color.
3. The bottom of the gauntlet covers the back of the hand of the wearer in a smooth curved shape and does not cover the knuckles.
4. The top of the gauntlet ends before the elbow bend of the arm at the upper portion of the forearm.
Optional Details: Compad:
Image URL: https://drive.google.com/file/d/1Erl87F … drive_link
1. If compad is present it is on the left gauntlet and positioned on the top of the arm, closer to the wrist.
2. Compad is painted a gunmetal grey or black color closely matching the base gauntlet, the two (2) circular buttons on the compad are light gold in color.
Additional Images:
Image URL: https://drive.google.com/file/d/1IHGT86 … drive_link
Image URL:https://drive.google.com/file/d/1q_fqkV … drive_link
Image URL:https://drive.google.com/file/d/1ythk1P … drive_link
Boots:
Image URL: https://drive.google.com/file/d/1nw2CDd … drive_link
Required Details:
1. Dark brown boots made of leather or leather-like material.
2. Boots can be one piece or a boot and a spat, if a boot and a spat, then the boots must tuck into the spats and the top of the boots cannot show.
3. The front of the boots at the top does not cover the wearer’s knee and is ending right below the knee.
4. In the back, the spat portion ends below the front at the upper portion of the calf.
5. The spat portion of the boot is made of many vertical strips of the material.
6. At the top strips are wider than the ankle and are evenly spaced and proportional to the wearer.
7. The spats are well fitted to the wearer.
8. There are two (2) bands of the same material at the top of the boot spat portion and one (1) band at the bottom by the ankle.
9. The band at the bottom is approximately one (1) inch (approximately 2.5 cm) wide and the bands at the top are approximately one and a half (1.5) inches (approximately 4 cm) wide.
10. There is no visible securation method for the bands and boots.
Additional Images:
Image URL: https://drive.google.com/file/d/1WV3H96 … drive_link
Lightsaber:
Image URL: https://drive.google.com/file/d/1c54TOI … drive_link
Required Details:
1. Character accurate lightsaber. Hilt only is allowed and should match the character references.
2. ROTS Hero lightsaber hilt. Master Replicas, Hasbro or costume build lightsaber matching that are used in ROTS are accepted. ATOC hilt not accepted.
3. Black hand grips.
4. Black covertec wheel at pommel end, opposite side to control box.
5. Nickel colored plating.
6. Graflex emitter end.
7. Button colors match references, one (1) silver and one (1) copper.
8. The lightsaber may be a static prop (hilt-only).
9. No toy sabers, no Ultimate FX short saber.
Optional Details:
1. Attached blade(s), LED lights, and sound effects are allowed but not required.
2. If bladed, must be blue.
Additional Images:
Image URL: https://drive.google.com/file/d/16dmXNo … drive_link
Image URL: https://drive.google.com/file/d/1T3yg2X … drive_link
Image URL: https://drive.google.com/file/d/1PbrdLv … drive_link
Image URL: https://drive.google.com/file/d/1a8H8dH … drive_link
Optional Items
Brown-hooded Jedi Cloak:
Image URL: https://drive.google.com/file/d/1V-9yTG … drive_link
Required Details:
1. Dark brown in color.
2. Cloak should be made of wool or wool-like material.
3. No sleeves and no visible method of securing cloak in place.
4. Hood is rounded in shape.
5. Hood should reach to the bottom of shoulder blades and not cover shoulders when down.
6. Hood is smaller in size and depth compared to movie equivalent.
7. Hood should frame face when hood is up.
8. Cloak should end at the bottom of the shin in length and be no more than approximately six (6) inches (approximately 16 cm) off the ground.
9. Must be proportionate to the wearer and match references.
Additional Images:
Image URL: https://drive.google.com/file/d/1Ligbib … drive_link
Image URL: https://drive.google.com/file/d/1lO-nSL … drive_link
Image URL: https://drive.google.com/file/d/1IhB9wp … drive_link
Image URL: https://drive.google.com/file/d/13ycUnl … drive_link
Image URL: https://drive.google.com/file/d/1aPHh6g … drive_link
Alternate Configurations
(Source: Tales of the Jedi)
-Face & Hair (see below)
-Armour (as described above)
-Outer Tunic (as described above)
-Inner Tunic (as described above)
-Belt (see below)
-Pouches (as described above)
-Belt Box (see below)
-Covertec Clip (as described above)
-Food Capsules (as described above)
-Pants (as described above)
-Gloves & Gauntlets (see below)
-Boots (as described above)
-Lightsaber (as described above)
Face & Hair:
Image URL: https://drive.google.com/file/d/1BeMnZl … drive_link
Required Details:
1. Hair is cropped at the nape of the neck, shorter than in the Clone Wars.
Additional Images:
Image URL: https://drive.google.com/file/d/1Ac7Mxy … drive_link
Belt:
Image URL: https://drive.google.com/file/d/1B-Zn2B … drive_link
Required Details:
1. Belt has eight ( 8 ) studs evenly and equally spaced on the belt, each set is situated above and below the thinner secondary belt to hold it in place. Two (2) sets are positioned on either side of the buckle on the front and two (2) sets are situated on either side of the belt box on the back.
2. Buckle is silver in color. Buckle consists of three (3) rectangles, one (1) slightly larger than the two (2) on either side which are the same size. Rectangles are connected by narrow rectangles.
Additional Images:
Image URL: https://drive.google.com/file/d/1C_o8VV … drive_link
Image URL: https://drive.google.com/file/d/1C1-dF- … drive_link
Belt Box:
Image URL: https://drive.google.com/file/d/1BrUzXF … drive_link
Required Details:
1. One (1) additional belt box is situated on the centre-back of the belt. The belt box is rectangular box in shape and matches the belt in color.
2. Box is approximately the same height as the belt width and should have impressions and grooves that match references.
Gloves & Gauntlets:
Image URL: https://drive.google.com/file/d/1BAjVBQ … drive_link
Right Gauntlet:
Image URL: https://drive.google.com/file/d/1B-Zn2B … drive_link
Required Details:
1. Glove and gauntlet is dark grey in color and made from leather or leather-like material.
2. The bottom of the gauntlet covers the back of the hand of the wearer in a smooth curved shape and does not cover the knuckles.
3. The top of the gauntlet ends before the bend of the arm at the upper portion of the forearm.
4. There are three (3) bands at the wrist, mid-forearm, and top of the glove.
5. The bands are made of the same material as the rest of the gauntlet and each has a smaller thinner strap in the middle of the band.
6. Smaller thinner straps are dark brown in color.
7. Each strap has one (1) buckle on the top of the arm. Buckle is the three (3) linked buckles that are silver in color.
8. No ribbing should be present on the glove or gauntlet.
9. Buckles are the same as the ones used on the ROTS glove but the ROTS glove is not accepted.
Additional Images:
Image URL: https://drive.google.com/file/d/1BrUzXF … drive_link
Image URL: https://drive.google.com/file/d/1BoJJaz … drive_link
Left Gauntlet:
Image URL: https://drive.google.com/file/d/1BAjVBQ … drive_link
Required Details:
1. Dark grey or black glove section made from leather or leather-like material.
2. Dark brown gauntlet section made from leather or leather-like material. Should match the belt in color.
3. The bottom of the gauntlet covers the back of the hand of the wearer in a smooth curved shape and does not cover the knuckles.
4. The top of the gauntlet ends before the elbow bend of the arm at the upper portion of the forearm.
5. Compad is on the left gauntlet and positioned on the top of the arm, closer to the wrist.
6. Compad is painted a gunmetal grey or black color closely matching the base gauntlet, the two (2) circular buttons on the compad are light gold in color.
Additional Images:
Image URL: https://drive.google.com/file/d/1B0Pj3d … drive_link
Image URL: https://drive.google.com/file/d/1C-og1O … drive_link
Costume Resources: Reference Photo Gallery (The Clone Wars)– https://drive.google.com/drive/u/1/fold … wFllfPZv2y
Costume Resources: Reference Photo Gallery (Tales of the Jedi)– https://drive.google.com/drive/folders/ … EuJFIoQMmW
Author: Ashlyn_Dubreas
Updated: February 13th 2026
PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.