CHARACTER DESCRIPTION
Axe Woves was a human male Mandalorian from the planet Mandalore who served with the Mandalorian resistance during the New Republic’s era. In 9 ABY, Woves was on the moon of Trask alongside resistance fighters Lady Bo-Katan Kryze and Koska Reeves, where they rescued another Mandalorian named Din Djarin from a group of Quarren. After Kryze failed to return to Kalevala with the Darksaber, Woves and the other Mandalorians under Kryze’s command defected. Kryze’s warriors took her fleet and became mercenaries for hire, with Woves becoming their new leader.
(Source: Wookieepedia – https://starwars.fandom.com/wiki/Axe_Woves)
Front Image
https://imgur.com/NuqElIM
Source: Screengrab
Back / Second View Image
https://i.imgur.com/YO2TGr1.jpg
Source: Screengrab
Required Items:
Helmet
https://i.imgur.com/icoSMlm.jpg
Source: Screengrab
Required Details:
1. The helmet, including its shape, proportions, and details are true to The Mandalorian series Season 3 version.
2. The helmet is a Post-Imperial style Mandalorian helmet.
3. The helmet has two smaller horizontal triangles on the forehead that are situated closer together than on OT-style Boba Fett helmet.
4. Helmet has a dark tinted visor which obscures the wearer’s face.
5. Helmet base color is a medium blue – these include the ear caps, back plates, lower cheeks and range finder.
6. Mandibles, head band, key slots, and the detail bottom piece of the rangefinder are dark gray.
7. Upper cheeks are black.
8. There are lines between the upper and lower cheeks that are medium purple.
9. There is a “halo” in the middle of the dome that is light gray.
10. The rangefinder stalk is metallic in color and approximately 5 inches (12.5 cm) tall.
11. Rangefinder assembly on the right side features a rangefinder which is medium blue with a black rectangle painted on the top. Dark gray framed window (viewfinder) on bottom.
12. The right cheek has a heavily weathered steel-colored “Diagnostic Port” that is a small circular detail piece with 3 holes, closely resembling the OT 3-hole Borden connector, installed or molded into the helmet.
13. Back of the helmet has six keyhole slots, painted dark gray.
Optional Details:
1. There are silver scratches and black wash/misting matching screen used prop.
Additional Images
https://i.imgur.com/29AO30F.jpg
Source: Screengrab
https://imgur.com/cmtSd9M
Source: Screengrab
Chest Armor + Shoulder Tabs
https://i.imgur.com/iyuLD7t.jpg
Source: Screengrab
Required Details:
Chest Armor
1. Chest armor is Post-Imperial, four piece Unified plate style.
– Consists of left and right chest plates, a center diamond and an abdominal plate.
2. Chest Armor plates are dark gray in color with silver scratches, consisting of left and right chest plates, a center diamond, and an abdominal plate.
3. The armor is solid in coloring with no texturing.
4. Center diamond between chest plates has a small recessed rectangular middle section.
5. Diamond is the same color as the armor and has a rectangular middle section that appears to be silver in color.
6. Armor plates possess a sharp return edge.
7. Armor attaches securely to the flak vest, attachments mudt not be visible.
Optional Details:
1. There are 3 small, closely spaced and empty holes on the lower right of the ab plate.
2. Return edges are roughly 1/4 inch (6 mm) in thickness.
Shoulder Tabs
1. Tabs are dark gray with silver scratches and black wash/misting matching screen used prop.
2. Tabs curve downward to match the yoke of the flak vest, the front edge is approximately 1 to 1.5 inches (3-4 cm) from the top edge of the chest plate and runs parallel to the top edge of the chest plate.
3. Tabs have a raised edge and a thin outer border.
4. The back of the tab has a 2 inch (5 cm) slot to which a leather or leather-like strap is seen looping between the plate and the back plate.
5. Straps insert into slots on the Back Armor, giving the appearance they are holding the Jetpack on the wearer.
6. Tabs are sized so they do not cover the shoulder straps of the vest completely and are mounted without visible attachments.
Optional Details:
–
Additional Images
https://i.imgur.com/29AO30F.jpg
Source: screengrab
Back Armor
https://i.imgur.com/Ucqk8gn.jpg
Source: Screengrab
Required Details:
1. Armor fits the curvature of the wearer & extends from upper shoulder blades to the level of the Flak Vest (approximately waist height).
2. Color of the armor is dark gray.
3. At the top corners, there are curved extensions pointing towards the shoulder plates.
4. At the bottom, there are flared sections that extend around the sides of the waist.
5. The top of the back plate is attached to the shoulder plates via leather or leather-like straps.
6. The jetpack attaches to the back armor.
Optional Details:
–
Additional Images
https://i.imgur.com/YO2TGr1.jpg
Source: Screengrab
Shoulder Bells
https://i.imgur.com/r0SoP6D.png
Source: Screengrab
Required Details:
1. Shoulder bells are dark gray with silver scratches and black wash/misting matching screen used prop.
2. Shoulder bells stop 1.5 to 2 inches (3 cm to 5 cm) above the end of the short sleeve of the flight suit.
3. Armor is symmetrical with a raised edge around its perimeter.
4. Shoulder bell has no visible methods of attachment.
Optional Details:
–
Gauntlets and Handplates
https://i.imgur.com/r0SoP6D.png
Source: Screengrab
Gauntlets
Right Gauntlet
Required Details:
1. Gauntlet is medium blue with silver scratches and black wash/misting.
2. Gauntlet is a clamshell-style without any visible closure methods.
3. The top of the gauntlet features two tiers with the tallest at the beginning of the wearer’s elbow.
4. Two trapezoidal shapes are featured on the inner side of the tier housing next to the darts section.
5. Two rectangular details are located on the outer surface of the gauntlet.
– Closer to the wrist is a smaller faceted rectangular piece.
-Lying further laterally on the outer aspect of the gauntlet is a raised rectangular detail.
6. There are two recessed areas of the middle tier, the first just in front of the darts and the second just before the second tier.
– First recessed area is dark gray.
– Second recessed area has three thin horizontal stripes. Obvious weathering outlining the recessed area in a dark color.
7. Dart housing is:
– Open to allow insertion of 4 darts and the corresponding dart holder.
– Tapered edges flanking the centrally placed darts.
8. Four silver darts extend slightly from a recessed section at the front edge of the tallest tier.
9. A recessed display panel consisting of horizontal alternating raised and dipped rows is featured on the front edge near the wearer’s wrist. This greeblie is dark gray.
Left Gauntlet
1. Gauntlet is medium blue with silver scratches and black wash/misting matching screen used prop.
2. Gauntlet is a clamshell-style without any visible closure methods.
3. The top of the gauntlet features three tiers with the tallest at the beginning of the wearer’s elbow.
4. The top greeblie is trapezoidal in shape. Extending from its front end is a raised thin square shaped rod.
5. Four trapezoidal shapes feature on the side of the tier, two on each side. On the outer side, the trapezoid furthest from the elbow has three horizontal slots.
– The tapered trapezoidal greeblie at the second tier has vertical slots – it is dark gray in color.
6. At the part closest to the wrist at the third tier is a recessed rectangular piece (dark gray) that houses a greeblie which has features similar to a Glenross dental expander (metallic color).
7. The recessed keypad is dark gray. The keypad features four horizontal rows and six columns with rectangular buttons.
Optional Details:
1. The back counterpart portion of the left gauntlet has a recessed border. Along the inner surface are at least four recessed rectangular details.
Hand Plates
Required Details:
1. Hand plates are dark gray with silver scratches and black wash/misting matching screen used prop.
2. Hand plates are symmetrical with six sides, angled corners, and two bent faces.
3. Both hand plates have three discernible sections (two side sections separated by a center section) with well defined ridges separating them.
4. The central section consists of:
– Raised triangle located centrally in the section.
– Raised trapezoidal section at the side closest to the wrist, central to this raised section is a recessed slot.
5. The side sections are curved slightly downward to conform to the hand.
6. Plates secure to the gloves without any visible means of attachment.
Optional Details:
–
Additional Images
https://i.imgur.com/cDCLd6n.jpg
Source: Screengrab
https://i.imgur.com/5tVGPYy.jpg
Source: Screengrab
https://i.imgur.com/YqF3qz8.jpg
Source: Screengrab
Thigh Armor
https://drive.google.com/file/d/14oMu5O6zWQxwFRCukF7AVZgy3dPKhckK/view?usp=drive_link
Source: Screengrab
Required Details:
1.There are specific pieces for the right and left thighs.
2. Thigh armor is Dark gray with silver scratches black wash/misting matching screen used prop.
3. Right thigh features:
– Raised rectangular ridge in the center that merges into the top and bottom raised edge.
– Faceted piece with three distinct faces.
4. Left thigh features:
– Raised rounded edge.
– Faceted piece with three distinct faces.
5. Both are worn with no visible means of attachment to the flight suit.
Optional Details:
–
Additional Images
https://drive.google.com/file/d/16EkB03CHDUSq05GMr5X1JhuIlJzcE_7c/view?usp=drive_link
Source: Screengrab
Knee Armor
https://i.imgur.com/zFH05LL.jpg
Source: Screengrab
Required Details:
1. Knee armor is medium blue with silver scratches and black wash/misting matching screen used prop.
2. Armor shape is patterned to resemble a rotated “E” shape.
3. Whilst the same design on each, the armor pieces are mirror reflections specific to the right and left knee.
4. 1 to 1.5 inch (2.5-4 cm) wide elasticated black strap extends from the backing cloth mount to wrap around the back of the wearer’s knee through the tunnel section as described in the flight suit bottom section.
5. Knee dart launcher area:
– Right – no actual darts. The recessed area of the launcher and a rectangular section just in front of it are matte black.
– Left – Two knee darts – metallic silver, weathered black.
Optional Details:
–
Additional Images
https://i.imgur.com/w1r46ZM.jpg
Source: Screengrab
Shin Armor
https://i.imgur.com/9ENBLRB.png
Source: Screengrab
Required Details:
1. Worn on the right shin overlying the gaiter.
2. Shin armor is medium blue with silver scratches and black wash/misting matching screen used prop.
3. Elongated trapezoidal shape, wide at the knee end, tapering towards the ankle.
4. Raised edges spanning the perimeter of the piece.
5. Faceted piece with three distinct faces (front and two sides) with sides bending to conform to leg.
6. On the front-facing section, close to the knee, there are three vertical recessed pills. Their position is biased towards the outer edge.
7. Worn with no visible means of attachment to gaiter.
Optional Details:
–
Additional Images
https://i.imgur.com/SKmM9i6.jpg
Source: Screengrab
Jetpack
https://i.imgur.com/p2ACoLj.jpg
Source: Screengrab
Required Details:
1. Jet pack has the following main components
– 1 center tank
– 2 side fuel tanks
– “Piano Keys” greeblies running horizontally at the top of the main body on each side of the raised center strip
– 1 central rocket
– 2 thruster caps.
2. Colors are medium blue, silver, dark gray, and pale yellow.
3. Central rocket
– Bullet head shape
– Larger in scale than thruster tops
– Central rocket has a unique rocket base with three vertical indents on the outward face that are approximately 1.5 inches (4 cm) tall with a silver/metallic connecting ring
– The bottom inside of the central rocket has no visible exhaust vent
4. Side fuel tanks have the following features:
– Bullet head shaped thruster tops
– Silver or metal like connecting ring
5. Jetpack securely attaches to back armor with no visible means of attachment.
Optional Details:
–
Additional Images
https://i.imgur.com/dAqtLFO.png
Source: Screengrab
https://i.imgur.com/uMPL0VO.png
Source: Screengrab
https://i.imgur.com/YO2TGr1.jpg
Source: Screengrab
Flight Suit
https://i.imgur.com/9AYwdrY.jpg
Source: Screengrab
Required Details:
Flight suit top
1. Flight suit top is made of cotton/cotton blend fabric similar to cotton twill.
2. Color is medium gray.
3. Topstitching is light gray.
4. Can be either one or two pieces in construction. If the flight suit is one-piece, then there is a waistband between the top and bottom sections to create the appearance of a two-piece flight suit.
5. Flight suit top zips up in the back, with a cover panel.
6. Collar:
– Mandarin style approximately 2 inches (5 cm) tall
– No visible seam or closure at the front
– Back closure in line with the whole top
7. Gusset construction in armpit and groin – elasticated gray
8. Flight suit top has a double sleeve construction: long sleeves with short sleeves layered on top.
9. Short sleeves have an extra strip of fabric added at the bottom, as well as vertical trim along the front and back, approximately 0.5 of an inch (1 cm) wide. All feature top stitching. The bottom edge has three seams, approximately 0.5 of an inch (1 cm) apart.
10. Long sleeves have five horizontal quilted ribs visible between the short sleeves and the gauntlets. There are triangle designs sewn on the front of both long sleeves and aligned with the horizontal rows.
11. Elasticated and tapered sections are present at the end of the arms
Flight Suit Bottom
1. Flight suit bottom is made of cotton/cotton blend fabric similar to cotton twill.
2. Color is medium gray.
3. Topstitching is light gray.
4. Can be either one or two pieces in construction. If the flight suit is one-piece, then there is a waistband between the top and bottom sections to create the appearance of a two-piece flight suit.
5. Flight suit bottom has a hidden zippered closure in the front with the open edge on the right, starting at an angle mid-crotch, and ending under the wearer’s belt.
6. Double topstitch detail running on the front and back of the leg centrally.
7. Side seams run on the outer aspect of the from the waist to the bottom cuff – double topstitched seam.
8. Six-sided “diamond-shaped” crotch gusset:
– Elasticated gray material
– Hexagon panel
– Extends down to the middle inner thigh and stops halfway to the front of the thigh
– Double-top stitching
9. Within the area located between the upper and lower knee seams of the suit, there exists a fabric tunnel fashioned from the same material as the suit itself. This tunnel serves as a conduit for an elasticated band (approximately 1 to 1.5 inches wide (2.5-4 cm) that secures the knee armor/cloth backing in place.
10. Elasticated and tapered sections are present at the end of each trouser leg.
Optional Details:
–
Additional Images
https://i.imgur.com/FFQ3hko.png
Source: Screengrab
https://i.imgur.com/B7JLZh3.png
Source: Screengrab
https://i.imgur.com/ocepu4a.png
Source: Screengrab
https://i.imgur.com/FUNS6I8.png
Source: Screengrab
https://i.imgur.com/epEni8Q.jpg
Source: Screengrab
https://i.imgur.com/nLycmHg.jpg
Source: Screengrab
https://i.imgur.com/1bb5l8J.jpg
Source: Screengrab
https://i.imgur.com/jVmXOtL.png
Source: Screengrab
https://i.imgur.com/zSmuH6m.png
Source: Screengrab
Flak Vest
https://i.imgur.com/9AYwdrY.jpg
Source: Screengrab
Required Details:
1. Flak Vest consists of
– Shoulder straps which are canvas or linen.
– Main flak vest body made of leather/leather-like material.
2. Shoulder straps:
– Pale gray in color.
– Ribbing along the length from front to back.
– Straps meet in the front and have a visible distance between them in the back.
3. Flak vest main body:
– gray color – darker than the flight suit.
– Sized to closely match the height of the Chest and Ab Plates, but short enough to stop before reaching the belt.
– Vertical ribbing on the sides under the arm holes.
– Approximately 2 inches (5 cm) section measured from the lower edge of the body of the flak vest.
– 2 inches (5 cm) strap (made of the same material as the body of the vest) which arises from the sides of the vest approximately 1 inch (2.5 cm) from the bottom edge of the vest. This strap will be used to attach to the bottom of the back armor.
4. Closure is located in the middle of the back.
5. Leather or leather-like closure strip – between the top edge of the back of the vest lying between the shoulder straps:
– Made of the same leather or leather-like material as the body of the vest
– Color matches the flak vest body.
– At least three rows 1 inch (2.5 cm) apart.
Optional Details:
–
Additional Images
https://i.imgur.com/HmUfc5J.png
Source: Screengrab
https://i.imgur.com/IHKh2Nt.png
Source: Screengrab
https://i.imgur.com/0uNQFLa.jpg
Source: Screengrab
https://i.imgur.com/xStZQBu.jpg
Source: Screengrab
Apron
https://i.imgur.com/r0SoP6D.png
Source: Screengrab
Required Details:
1. Gray color – darker than the flight suit, similar shade to the flak vest body.
2. Made of leather or leather-like material.
3. Sides taper inward toward the belt with rounded bottom corners.
4. Stitching is white or off-white and separates the pattern into thirteen sections.
5. Apron is worn underneath the flak vest and extends downwards under the belt.
6. Bottom of the apron also extends past the belt and ammo pouches – approximately 2 to 3 inches (5 – 7.5 cm).
7. There is no visible form of attachment.
Optional Details:
–
Additional Images
https://drive.google.com/file/d/1B-fFFqqENVCo0oMyouQxJBm-4euvHnBC/view?usp=drive_link
Source: Screengrab
https://i.imgur.com/9AYwdrY.jpg
Source: Screengrab
Belt and Holster
https://imgur.com/LnsyoSl
Source: Screengrab
Required Details:
1. All Belts, Holsters, and Ammo Pouches are made of leather or leather-like material.
2. All sizes are approximate and must be scaled to the wearer.
3. The following components comprise this section and will be broken down individually: Girth Belt (two layers), Ammo Belt, Ammo Pouches, and Holster.
Girth Belt
1. Consists of two main sections, front and back
2. Each section consists of an inner base layer and an outer layer, and both sections have angled corners.
3. Each section consists of:
– Inner base layer is approximately 3.5 inches (9 cm) wide.
– The outer layer is narrower than the inner base layer approximately 3 inches (8 cm) wide.
– On the upper edge of the outer layer, there are two horizontal ribs, approximately 1/8 of an inch (3 mm) wide.
– On the bottom edge of the outer layer, there are three horizontal ribs, approximately 1/8 of an inch (3 mm) wide.
– The ribbing matches the clipped corners of the inner layer but stops short of the inner layer edge on the ends by approximately 1 inch (2.5 cm) on all sections.
4. The front section overlaps the back section with horizontal tabs made of the same material which are the same width as the outer layer of the girth belt. (This allows for size adjustment)
5. The girth belt is covered by the ammo belt and hip buckles.
Ammo Belt
1. Belt is approximately 1.5 inches (4 cm) wide with lighter single-stitched edges.
2. Two Hip Cinch Buckles connect the front and back Girth Belt.
3. Buckle is on the center front.
– Buckle is an elongated hexagon shape that is metallic black with another, smaller elongated hexagon shape on top that is metallic.
– Two screw holes located on the wearer’s right side of the black buckle, one above the other.
– Smaller metallic buckle has a line running vertically at about the first-third (from the wearer’s right) of the width.
– The buckle has a vertically elongated hexagonal recess with a vertical line/indent to the (observer’s) right of the indent.
– The last two-thirds of the buckle has a line/indent and two horizontal pills.
–The line comes from the bottom center of the buckle that goes up at a 40 degree angle to just below the center of the pills and continues horizontally to the end of the buckle.
4. Eight total ammo pouches are worn on the ammo belt.
Optional Details:
1. Ammo belt is stitched to girth belt in:
– The front with one loop of matching cording lying between the front pouches located on each side.
– In the back with loops of matching cording.
– One located centrally in the back.
– One in between each pair of back pouches on each side.
Ammo Pouches
1. There are three sets of pouches:
– Smallest 2 – sit with one on each side of the buckle that are approximately 2 inches (5.5 cm) wide.
– Medium 2 – sit adjacent to front pouches and are approximately 2.5 inches (6.5 cm) wide
– Largest 4 – sit on the back section of the girth belt and are approximately 3 inches (8.5 cm) wide
2. All pouches are approximately the same height or slightly taller than the girth belt itself, at approximately 3.5-4 inches (9-10 cm) in height
3. Pouches have an angled top, and the flap tapers slightly inward on the side of the pouch to rounded corners
4. Flaps have lighter visible edge straight stitching.
5. There are small, silver, buttons present on each of the flaps.
Optional Details:
1. All pouch flaps have an embossed edge.
Holster
1. Holster is worn on the wearer’s right.
2. Holster consists of:
– Holster form is made of the same brown leather or leather-like material as the girth belt
– Two leather or leather-like straps
3. Straps are looped through triangular-shaped brackets at the Girth Belt and then stitched back onto itself
4. Brackets are painted metallic silver and attach to the Girth Belt but the attachment is not visible when wearing the belt
5. Holster and strap edges have visible single stitches on the edges.
6. Holster sits around where the hand lays with arms down.
– The front strap overlaps the upper outer corner of the right thigh armor.
– The bottom of the holster is not longer than the bottom edge of the right thigh armor.
Optional Details:
1. Holster is secured to the wearer’s leg so as to not swing around.
Additional Images
https://imgur.com/Cw9bYbV
https://imgur.com/vs0gOTq
Source: Screengrab
Gaiter
https://drive.google.com/file/d/1PMEPSCd2llX_h2lypVz5F6tEV8GCQ_rQ/view?usp=drive_link
Source: Screengrab
Required Details:
1. Gaiter components are made of leather or leather-like material with a bit of grain visible.
2. The main sections are a slightly darker brown than the belt and are comprised of four sections indicated by the seams on the front, back, and each side.
3. Light single stitching.
4. Zip closure on the inner side.
5. At the bottom edge on each side, there are indents:
– Outer face – small rectangular shape approximately 0.75 of an inch x 0.5 of an inch (2 x 1 cm).
– Inner face – right-angled trapezoid approximately 1.5 inches x 0.75 of an inch (3.5 x 2 cm).
6. Rectangular closure straps bridging the zipper on the inner side of the gaiter.
– Approximately 1 1/8 inches (3 cm) wide.
– Two per gaiter, one located at the ankle and the upper calf underneath the fold down.
7. Fold down edge from the top of the gaiter, approximately 3 inches (8 cm) wide.
8. Approximately 0.5 of an inch (1.5 cm) elastic strap that hugs the boot around the arch of the shoe.
Optional Details:
1. Rectangular closure straps bridging the zipper on the inner aspect of the gaiter have rounded corners and stitch lines.
Additional Images
https://i.imgur.com/qL9f7r4.png
Source: Screengrab
https://i.imgur.com/QetYvY0.jpg
Source: Screengrab
https://drive.google.com/file/d/1RgoPtO1MUp9QJhZira84kpiuCv_ikqAW/view?usp=drive_link
Source: Screengrab
Boots
https://i.imgur.com/QsSqSJQ.jpg
Source: Screengrab
Required Details:
1. Brown leather, or leather-like, ankle-height boot.
2. Sole is solid black.
3. Elastic U-shaped side panels that span from the sole up to the top of the boot are present on both sides.
4. Boots have no visible zippers, laces or other embellishment.
Optional Details:
–
Optional Items
Westar 35
https://imgur.com/eE218sA
Source:Screengrab
Required Details:
1. Blaster pistol is based on the Infinity Firearms pistol (2011 frame) with Infinity Skater Terrain Grips and Billet Grip XL Magwell.
2. Blaster pistol grip and Magwell do not have any logos or writing.
3. Blaster Pistol slide has angled top corners and the slide extends rearward to meet the end of the grip safety.
4. Blaster Pistol slide features a raised greeblie with 5 horizontal rows on the end.
5. Blaster Pistol features an extended slide safety on the right side, immediately below the slide and behind the grip.
6. Blaster pistol is silver and black.
7. The Magwell and grip screw are a metallic silver color.
8. The textured pattern on the grip is a medium brown or gray color.
Optional Details:
–
Costume Resources
Reference Photo Gallery –
Character Page –