CHARACTER DESCRIPTION
Benthic “Two Tubes,” also known simply as “Tubes,” was a male Tognath mercenary pilot who flew alongside his eggmate and brother, Edrio. The two shared the nickname derived from the breathing apparatus that allowed their Tognath physiology to process oxygen atmospheres. Benthic’s homeworld Yar Togna was conquered and occupied by the Galactic Empire, forcing him to flee as a refugee. Desiring to strike back at the Empire, Benthic allied himself with Enfys Nest’s Cloud-Riders and later Edrio and Benthic allied with Saw Gerrera sometime before the Battle of Yavin.
(Source: Wookieepedia – https://starwars.fandom.com/wiki/Edrio )
Front Image
URL: https://drive.google.com/file/d/1mJw7uR … drive_link
Source: Rogue One TOPPS Trading Card
Back / Second View Image
URL: https://drive.google.com/file/d/165Uhm_ … drive_link
Source: Entertainment Weekly
Required Items
Item Image URL: https://drive.google.com/file/d/1ibQzoU … sp=sharing
Source: Rogue One
Required Details
Helmet/Mask
1. Helmet is a rigid material.
2. Helmet is a simulated bone skull cap including two eye sockets.
3. Helmet is painted in a khaki/sand base color with darker earthtone weathering to simulate bone.
4. Bone-like sections of the mask have a satin or matte finish.
5. Helmet eyes are a bright silver color.
6. In the middle of the forehead there is an oval shaped, gloss-translucent inset piece affixed with small metal screws.
7. An iron-colored ‘spark plug’ greeblie protrudes from the top back of the skull.
8. The entire helmet is weathered in medium to dark earth tones.
9. Gas mask style faceplate piece for hose connections is a weathered steel-gray color.
– Mask has a weathered-silver rectangular vent piece that protrudes from the front.
– Mask has four small circular ‘ports’, two near where the nose would be, and two ⅔ of the way down the vent piece.
10. Ear discs are a weathered silver with greeblies and antennae.
11. There is an iron-colored ‘disc break’ greeblie centered on the back of the head. Its upper edge is set-in under the back arch of the skull cap/helmet.
– Rear ‘disc brake’ has heavy weathering and “rust”.
– Disc is approximately 4-5 inches (10-12.5 cm) across and does not cover the back of the neck.
Tubes
1. Silver and black segmented tubes attach to the front of the mask, extending slightly below the belt.
2. Tube ends are hidden between the wearer’s back and backpack.
Additional Images
URL: https://drive.google.com/file/d/19_YNpx … drive_link
Source: Rogue One
URL: https://drive.google.com/file/d/1S7viQS … sp=sharing
Source: Rogue One Visual Guide
URL: https://drive.google.com/file/d/1m10byU … drive_link
Source: Rogue One
Balaclava:
Item Image URL: https://drive.google.com/file/d/1yTKp7P … sp=sharing
Source: Rogue One
Required Details
1. Balaclava is made of vertical strips of medium brown suede, suede-cloth, or similar suede-like material.
2. Balaclava should be form fitting and should completely conceal the wearer’s skin and hair.
3. Ear “muffs” must be covered in dark brown suede or other similar suede-like material.
4. Ear “muffs” sit over the wearer’s ears to cradle circular ear greeblies.
Additional Images
URL: https://drive.google.com/file/d/165Uhm_ … drive_link
Source: Rogue One
URL: https://drive.google.com/file/d/1T49C_O … drive_link
Source: Rogue One
Scarf:
Item Image URL: https://drive.google.com/file/d/19_YNpx … drive_link
Source: Rogue One
1. A khaki mesh military scarf is wrapped around the neck and tucked into the tunic.
2. Scarf mesh squares are no larger than 1/4 inch (6 mm).
Additional Images
URL: https://drive.google.com/file/d/165Uhm_ … drive_link
Source: Entertainment Weekly
Tunic:
Item Image URL: https://drive.google.com/file/d/1mJw7uR … drive_link
Source: Rogue One TOPPS Trading Card
Required Details
1. The tunic is made of a nylon rip-stop, parachute synthetic, or similar texture material in a khaki color.
2. The tunic is long-sleeved and sleeves end over the wrists.
3. There are splits on each side that run roughly from the waist to the knee.
4. The tunic has horizontal bands that are approximately 2-4 inches (5-10 cm) wide.
5. The bands on the upper-back of the tunic form a triangular pattern pointing down.
– A zipper may be installed in the upper-back, but must blend in.
6. The bands on the lower-back “skirt” portion of the tunic form a triangular pattern pointing up.
7. The tunic is weathered in light earth tones.
8. The tunic has a small black gasket/greeblie on the upper right chest.
– Gasket is shaped like a half sphere and should be 2-2.5 inches (5-6.5 cm) in diameter.
– Gasket should have a small flat lip around the circumference.
Additional Images
URL: https://drive.google.com/file/d/1yTKp7P … drive_link
Source: Rogue One
Coat:
Item Image URL: https://drive.google.com/file/d/165Uhm_ … drive_link
Source: Promotional Image for Rogue One by Entertainment Weekly
Required Details
1. Coat is made out of blue/gray leather or leather-like material.
2. Coat is A-line shaped, long sleeved, and collarless.
3. Coat has hemmed openings at the sides that extend from the bottom of the coat to approximately the waist.
4. Coat is heavily weathered with medium earth tones all over.
Additional Images
URL: https://drive.google.com/file/d/1S7viQS … sp=sharing
Source: Rogue One Visual Guide
Shoulder Bells:
Item Image URL: https://drive.google.com/file/d/1yTKp7P … drive_link
Source: Rogue One
Required Details
1. Shoulder bells are a khaki-sand color (should nearly match the color of the tunic) and are fitted to the shoulder on the outside of the coat.
2. Small black screws are visible on the upper third of each side (one per side) of the shoulder armor.
3. The upper half of the bell has a glossy finish with the rest of the piece having a satin or matte finish.
4. Details appear to be carved into the surface.
5. Light weathering should be done in light to medium earth tones.
Additional Images
URL: https://drive.google.com/file/d/1xh8z3U … drive_link
Source: Rogue One TOPPS Trading Card
Macromonocular:
Item Image URL: https://drive.google.com/file/d/1StJqmA … drive_link
Source: Rogue One
Required Details
1. Necklace consists of a leather or leather-like cord long enough that the macromonocular rests just above the belt.
2. The attached macromonocular is approximately 5.5 inches (14 cm) in length and bright silver.
3. Macromonocular is vaguely flashlight shaped and the middle portion has the cording wrapped around it multiple times.
Additional Images
URL: https://drive.google.com/file/d/1S3e5ac … drive_link
Source: Rogue One Visual Guide
Belt:
Item Image URL: https://drive.google.com/file/d/1StJqmA … drive_link
Source: Rogue One
Required Details
1. Belt is approximately 3 inches (7.5 cm) wide and made of a dark brown leather or leather-like material, and is worn around the wearer’s waist.
2. Belt has 2 small pouches.
– The small pouches are approximately 3 inches (7.5 cm) wide, 4 inches (10 cm) tall, and 1 inch (2.5 cm) in depth.
– Small pouches sit to the sides of the front of the belt.
3. Each pouch has a top that is held shut without any visible closure.
4. Two additional straps that are approximately 1.5 inch (4 cm) wide, run from the front of the belt to the rear, draping loosely over the hips.
5. In the center front of the belt there are two non-functional buckles that are each approximately 1 inch (2.5 cm) wide.
– One buckle is flush with the top edge of the belt, and the other flush with the bottom edge.
6. On either side of the buckles there are weathered-silver cylinders wrapped in leather or leather-like material.
– Cylinders are long enough to extend just above and below the belt.
7. Between the two buckles there are two small, silver rivets, one above the other.
Additional Images
URL: https://drive.google.com/file/d/14pxst1 … sp=sharing
Source: Rogue One
Sporran:
Item Image URL: https://drive.google.com/file/d/15RJz_b … drive_link
Source: Rogue One
Required Details
1. Sporran is made out of a dark brown to black leather or leather-like material.
2. Sporran is rectangular in shape and is approximately 10 inches (25.5 cm) long and 6.5 inches (16.5 cm) wide.
3. It hangs from the front center of the belt by two straps on the top corners that are each approximately 1 inch (2.5 cm) wide.
4. Sporran is closed with a rectangular flap that is approximately 4 inches (10 cm) long.
– Flap has two 1 inch (2.5 cm) straps that go through silver, rectangular buckles.
Additional Images
URL: https://drive.google.com/file/d/1S7viQS … sp=sharing
Source: Rogue One Visual Guide
Gloves:
Item Image URL: https://drive.google.com/file/d/1FOEwoV … drive_link
Source: Rogue One TOPPS Trading Card
Required Details
1. Gloves are dark brown to black leather or leather-like material.
2. Gloves tuck under the cuffs of the tunic.
3. Hand armor is connected to the gloves with no visible form of attachment.
4. Hand armor appears to be simulated carved bone.
– There is a large plate that wraps around the back of each hand.
– There are 14 smaller finger segments per hand: three per finger and two per thumb.
5. The plates on the backs of the hands are double-layered and have a jagged appearance near the knuckles.
6. On the side of the hand plate near the thumb, approximately midway down the plate, there is a silver circular ‘button’.
7. In line with the ‘button’ there is a ‘crack’ that runs through the hand plate from the thumb to the wrist.
Pants:
Item Image URL: https://drive.google.com/file/d/1S7viQS … drive_link
Source: Rogue One Visual Guide
Required Details
1. Full length dark brown baggy pants are made of canvas or similar material.
2. Pants tuck into the boots.
3. There are three horizontal pads (one on top of the other) at knee height that create the appearance of knee-pads on both knees.
– Each pad section should be approximately 2.5 inches (6 cm) tall.
– Each pad goes from inseam, along the front of the knee, to the side seam.
4. On the back of the knees there are 15-20 rows of horizontal piping.
– Piping runs from inseam, around the back of the knee, to the side seam.
– The pants are weathered in black and darker earth tones, particularly the lower halves of the legs.
Additional Images
URL: https://drive.google.com/file/d/14pxst1 … drive_link
Source: Rogue One
Boots:
Item Image URL: https://drive.google.com/file/d/1Qik1x8 … drive_link
Source: Rogue One Visual Guide
Required Details
1. Boots are dark-brown leather or leather-like heeled boots.
2. Boots are approximately ankle height.
Backpack:
Item Image URL: https://drive.google.com/file/d/1eCYah- … drive_link
Source: Promotional Image for Rogue One by Entertainment Weekly
Required Details
1. Backpack base is an M75 Swedish military hiking frame, and has padded black shoulder straps.
2. There are five close ended cylinders with caps on the backpack, all stacked one above the other.
3. The top cylinder is a black/dark gray color with a 1.5 inch (4 cm) wide deep yellow stripe on the right side approximately 1 inch (2.5 cm) from the end.
4. The second and third down cylinders are both primarily a black/dark gray color.
– Each of the cylinders have two one inch (2.5 cm) deep red stripes on the right side.
– The outermost stripe is approximately 1 inch (2.5 cm) from the edge, and there is approximately 1 inch (2.5 cm) between the two stripes.
5. The fourth and fifth cylinders down are both a pale yellow/tan color.
6. All five cylinders are weathered with grays and light to medium earth tones.
7. The cylinders are held to the frame with 1 inch (2.5 cm) olive drab strapping over each end of each tube a few inches in from the edges.
– There are loose straps with buckles draping over the tops, with the buckles resting in front of the second tube from the top.
8. There is a third line of strapping down the center of the tubes.
– The strapping appears green on the first tube and black on the others.
– The green strap has a silver D-ring attached.
9. There is a small, black, canvas bag hanging approximately halfway down the backpack in the middle.
– Bag resembles a gas mask bag.
– There is a pocket on each side of the bag with a triangular flap.
– Above the flap on each side there is a small brass D-ring attached with black webbing.
– On the center front of the bag there is a design consisting of:
– A red circle, approximately half as wide as the bag.
– Two matching white lines in the middle of the red circle.
10. The backpack has a chest strap made of 1.5 inch (4 cm) black webbing.
– The strap closes via a silver heavy duty trigger style snap hook.
11. On the left shoulder strap, even with the chest strap, there is a “smoke grenade” attached.
– Smoke grenade is dark gray in color.
– Halfway up the canister there is an olive colored strip that is approximately 1 inch (2.5 cm) thick.
Optional Details:
1. There are two brass eyelets on the top edges of each of the two sides of the black bag.
Additional Images
URL: https://drive.google.com/file/d/1XJOB1L … drive_link
Source: Rogue One
URL: https://drive.google.com/file/d/1uhJjcr … drive_link
Source: Rogue One
URL: https://drive.google.com/file/d/1AWnrmm … drive_link
Source: Rogue One
URL: https://drive.google.com/file/d/1heoGrA … drive_link
Source: Rogue One
Blaster Rifle:
Item Image URL: https://drive.google.com/file/d/14pxst1 … sp=sharing
Source: Rogue One
Required Details
1. Blaster rifle is a long single barrel blaster.
2. Butt of the rifle is triangular with the appearance of being made of a medium brown wood, and contains a spiral-like carving with an “S” in the middle.
3. There is red and white cording wrapped around the “points” of the triangular stock.
4. There is a medium to dark brown leather or leather like strap attached to the blaster.
Additional Images
URL: https://drive.google.com/file/d/1RamPp- … drive_link
Source: Costume Gallery Image
URL: https://drive.google.com/file/d/1S7viQS … sp=sharing
Source: Rogue One Visual Guide
Alternate Configuration
Solo
Alternate Configuration Image
URL: https://drive.google.com/file/d/14PtPWV … drive_link
Source: Solo Visual Guide
Required Items
1. Helmet & Mask
2. Face Shield (See Below)
3. Balaclava
4. Scarf
5. Wrap (See Below)
6. Tunic
7. Coat
8. Shoulder Bells
9. Macromonocular
10. Neck Piece (See Below)
11. Belt
12. Sporran
13. Smoke Grenade (See below)
14. Gloves
15. Gauntlets (See Below)
16. Pants
17. Boots
Optional Items
1. Blaster Rifle
Face Shield
URL: https://drive.google.com/file/d/15XTuMw … drive_link
Source: Solo
Required Details
1. Face shield conforms to the shape of the mask.
2. Face shield has a mirror-like coating.
3. Shield should be tall enough to extend just past the top of the wearer’s helmet.
Additional Images
URL: https://drive.google.com/file/d/1JuZyqC … drive_link
Source: Solo
Wrap
URL: https://drive.google.com/file/d/15XTuMw … drive_link
Source: Solo
Required Details
1. Wrap is a dark beige wool or similar material.
2. Wrap should be at least 2.5 feet (75 cm) wide, and long enough to wrap fully around the helmet and mask, then crossing over the wearer’s body in front.
3. When worn should be positioned around the head with either one or both ends draped over the shoulders, or alternatively worn draped around the neck.
Additional Images
URL: https://drive.google.com/file/d/1IaCYCE … drive_link
Source: Solo
URL: https://drive.google.com/file/d/1Qp2dxg … drive_link
Source: Solo
Neck Piece
URL: https://drive.google.com/file/d/1NiS9QZ … drive_link
Source: Solo Topps Card
Required Details
1. Neck piece consists of 4 large teeth-like pieces and 12 smaller ones strung snuggly around the wearer’s neck.
2. Order of teeth pieces is:
– Three smaller teeth on each end and then alternating 1 big tooth and two small ones.
3. Each tooth is a tan color, almost bone-like in appearance.
4. Each tooth has two small black lines near the base of the tooth.
5. Each of the small teeth is approximately 3.25 inches (8 cm) long, and each of the large teeth is approximately 5 inches (12.5 cm) long.
Additional Images
URL: https://drive.google.com/file/d/1_81X7M … drive_link
Source: Solo
URL: https://drive.google.com/file/d/1SwP5qD … drive_link
Source: Solo
Smoke Grenade
URL: https://drive.google.com/file/d/14PtPWV … drive_link
Source: Solo A Star Wars Story
Required Details
1. Smoke grenade is worn on the belt to the left of the buckle.
2. Smoke grenade is primarily a deep gray color, with a 0.75 inch (2 cm) olive green stripe running horizontally around the middle.
3. Smoke grenade appears to attach to the belt with a 2 inch (5 cm) leather or leather-like strap that sits above the green stripes.
Gauntlets
URL: https://drive.google.com/file/d/1NiS9QZ … drive_link
Source: Solo Topps Card
Required Details
1. Gauntlets are made of a cream/beige leather or leather-like material.
2. Gauntlets consist of thin strips of the material that wrap and overlap starting at the wrist and ending below the elbow.
Additional Images
URL: https://drive.google.com/file/d/14PtPWV … drive_link
Source: Solo Visual Guide
URL: https://drive.google.com/file/d/15XTuMw … drive_link
Source: Solo
Alternate Configuration
Andor
Alternate Configuration Image
URL: https://drive.google.com/file/d/1Q3NAjA … drive_link
Source: Andor (Narkina 5)
Required Items
1. Helmet & Mask
2. Balaclava
3. Scarf
4. Tunic
5. Coat
6. Shoulder Bells
7. Macromonocular
8. Neck Piece (See Solo Configuration)
9. Belt
10. Sporran
11. Smoke Grenade (See Solo Configuration)
12. Gloves
13. Gauntlets (See Solo Configuration)
14. Pants
15. Boots
Optional Items
1. Blaster Rifle
Additional Images
URL: https://drive.google.com/file/d/1Rv4LXZ … drive_link
Source: Andor (Daughter of Ferrix)
URL: https://drive.google.com/file/d/1sa7HJU … drive_link
Source: Andor (Daughter of Ferrix)
Costume Resources
Reference Photo Gallery – https://drive.google.com/drive/folders/ … OYQ7n2dW5J
Uploaded: 2nd February 2026