Bodhi Rook; Jedha

ALL, Rogue One

CHARACTER DESCRIPTION
A former Imperial pilot, Bodhi has strong piloting and technical skills that he will put to use for the Rebellion. Ever practical, but highly anxious, Bodhi must gather his courage to bring the battle to the Empire. source

REQUIRED ITEMS:

Flight Suit

Required Details:

  1. Imperial TIE Pilot flight suit/overalls made of coated cotton drill, or similar, weathered to an almost gray color. All stitching on the flight suit is done in a visibly darker stitching than the base color, may be dark gray or a blue gray.
  2. The flight suit has a relaxed fit and has notable weathering throughout. All accent elements on the flight suit/overalls have two rows of topstitching.
  3. Flight suit/overalls has a front covered/hidden zipper and two PVC Imperial Cog patches with a 2″ / 5 cm” diameter on each shoulder. Both cogs must have one spoke aligned with the shoulder seam.
  4. There is a horizontal seam or double-topstitched line that runs across the upper chest, but does not extend around the back.
  5. Approximately 1.5” (38.1 mm) tall Mandarin-style collar with chevron closure. Collar closes from left to right with velcro underneath the exposed tab on the right side of the throat, with two rows of topstitching around the entire collar.
  6. On the right bicep, approximately 1.5″ / 4 cm below the cog emblem there is a rectangular cargo pocket, about 6″ / 15 cm wide and the height of the pocket runs the entirety of the wearer’s bicep to approximately 2″ / 5 cm past the elbow. The pocket has a flap closure; the flap has a chevron shape.
  7. On the left bicep, about 1.5″ / 4 cm below the cog emblem, there is a code cylinder pocket and vertical stitching divided it into five pen sleeves, the last two pen sleeves may be pleated. The bottom of the front center of the pocket is cut off at a bevel on side pointing in a view direction, with the broader upside forming the border of the pen sleeves. There are 3 metallic silver X-wing style code cylinders in each pen sleeve and 1 Imperial Code Cylinder.
  8. On the left forearm, above the wrist, there is a commpad pocket, approximately 5″ / 12.5-13 cm wide by 5.75″ / 14.5 cm tall, with no flap and a 2.25″ / 5.5-6 cm window in it. Commpad consists of 3 circles 2 buttons blue and red, 1 arcade switch button, 1 top only light button, white button and 2 circular buttons. Commpad may be curved for ease of wear.
  9. The back of the flight suit/overalls has two topstitched action pleats/gussets on the back of the shoulders and elastic casing near the wearer’s waist. The center back seam is flat felled.
  10. Above the waistband on the front, there are two rectangular shaped pockets with a curved opening on the top outside corners, the curved opening faces outwards.
  11. Underneath the waistband, there are two pockets that are rectangular shaped with a curved opening on top of the outside corners. The base of each sits on top of the cargo pockets directly beneath that end above the wearer’s knee.

Additional Images:

Boots

Required Details:

  1. Chelsea-style boot in dark brown with leather, or leather like spat/gaiter, that covers the shaft of boot so that no laces are showing.
  2. The spat/gaiter is the same as seen on the Rebel Scarif Marines[/box]

Goggles

 

Required Details:

  1. Colorless, transparent polyurethane safety goggles with black, round anti-fog vents that fit evenly with the width of the wearer’s head.
  2. Interior lenses with a diameter of approximately between 2.25″-2.75″/6-7 cm, that fit seamlessly with the outer rim of goggles; can be children’s magnifying glasses or two plastic discs that give the impression of depth standing away from the surface of the goggle.
  3. Googles are attached with a black elastic headband, .75″-1″ / 2-2.5cm broad diameter between 2.25″-2.75″/ 6-7cm; fit seamlessly with the outer rim of goggles, band wraps around the wearer’s head and sits above the hairstyle.
  4. Goggles worn on the forehead.

Additional Images:

Hair and Beard

 

Required Details:

  1. Top section of hair is pulled from around the temples with a black hair elastic at the crown of head, low ponytail worn at the base of the neck. Ponytail is a maximum of roughly 5” (13 cm) long from the base of the neck, with a slight curl at the end.
  2. Sides of the head are shaved above the ears.
  3. Hairstyle may be worn in a messy manner, with strands falling loose at temples.
  4. Natural hair colors only (black preferred); If a wig or extensions are used, they must be of high quality and appear like natural hair
  5. Scruffy unkempt beard in-between stubble and beard approximately 1-2 cm (1/3″-3/4″) in length.

Additional Images:

 

COSTUME RESOURCES:
Docking Bay 94 Guides

Updated: March 15, 2023

For Face Characters: Tattoos and body piercings – No tattoos or body piercings may be visible unless it is a tattoo/piercing the character has. They must be covered with makeup or by the costume.

PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.