CHARACTER DESCRIPTION
In his youth, Lando was a sportsman seeking a fortune at the sabacc tables. After he lost his beloved ship to Han Solo, Lando spent years living the high life and pursuing get-rich-quick schemes, with uneven results.
Source
REQUIRED ITEMS
[box]Face and Hair
Required Details:
- The costumer has a black pompadour style hair with large pointed tip sideburns.
- A chevron style mustache
- Wide well manicured goatee with a pointed end.
Note: If wigs or hairpieces are used, they must be high quality and look like real hair.
[/box]
[box]Tie
Required Details:
- A tie hangs loosely around the neck and ends near the upper thigh and is made of silk or silk like material and is approximately 3 inches (7.5 cm) wide.
- The tie is black and decorated with groups of white detailing of circles and parallel lines.
- The white lines are varying lengths, however they are no shorter than 0.25 inch (0.5 cm) and no longer than 8 inches (20.5 cm)
- The tie has angled ends
Additional Images:
[/box] [box]Shirt
Required Details:
- Vibrant yellow shirt that is made from a tight weave fabric such as silk broadcloth or similar mild sheen material.
- The shirt collar opens at the costumers right and is left open at the top edge showing a black liner.
- A stiff approximately 2 inches (5 cm) collar is present that ends at the costumer’s sides.
- The shirt has a black welt pocket that sits on the left breast that is approximately 5.5 inches (14 cm) wide.
- The shirt is tucked into the pants.
- The shirt has full-length sleeves with approximately 4 inch (10 cm) French square cuffs. The inside of the cuff is black and lined in the same fabric as the chest.
Additional Images:
[/box] [box]Gunbelt and Holster
Required Details:
- The belt is approximately 1.75 inches (4.5 cm) tall and made with black leather or leather-like material.
- There are two buckles, both are the same size and appear to be aluminum in color. These buckles separate the seamed belt from the ridged belt.
- The main band of the belt has 5 parallel rows of seams running the length of the belt ban spaced equidistant with the outermost seams starting 0.25 inch (6 mm) from the edges.
- The belt band is different in the space between the two buckles. It is covered in very small ridges that are very close together running lengthwise along the section of the belt.
- There is a thigh holster made from the same black leather or leather-like material as the belt that hangs down and is strapped to the right thigh.
- Holster is sized to fit a BlasTech SE-14r repeating blaster, and has a strap of the same material as the holster and belt that wraps around the thigh.
- The belt is sitting slightly loose on the hips and tilted sitting higher on the left hip.
Additional Images:
[/box] [box]Scarf Belt
Required Details:
- Made from twill or similar material.
- Belt is approximately 5 inches (12.5 cm) wide, except the last approximate 4 inches (10 cm) on either end that narrow down to a point
- Length is approximately the costumer’s waist multiplied by 1.5 so that the two ends hang down when knotted at the left hip
- The belt fabric is off-white/champagne in color
- There are three stripes present each approximately 1 inch (2.5 cm) wide and ½ inch (1.25 cm) from each other.
- Top and bottom stripes are both a shade of deep plum purple, the middle stripe is a bright scarlet red
- Stripes are painted or printed on, and only present on the front side of the scarf
- Belt front and back are formed from one piece of fabric folded over the top edge, no seams are visible on the other edges
- The belt is looped inside of the belt loops on the pants.
Additional Images:
[/box] [box]Cape
Required Details:
- A full cape that is made from tightly woven, medium weight, black cloth with a matte
- The cape ends at mid-thigh and is straight-cut around.
- The bright sapphire blue-colored lining is satin or similar material.
- The cape collar is black in color and made from leather or leather-like material
- The cape collar is approximately 3.5 inches (9 cm) tall and is top stitched with 7 horizontal seams that angle downwards as they reach the back, and are broken up by 12 vertical seams breaking it into 13 sections.
- Seams are only present on the outside of fabric
Optional Details:
- The cape liner is approximately 2 inches (5 cm) shorter than the cape.
- The black part of the cape is free of top stitching except for the collar.
- The blue liner is stitched at the bottom.
Additional Images:
[/box] [box]Shoes
Required Details:
- Shoes are black and a shiny leather or leather-like material with a pointed toe.
- The heels are approximately 1–2 inches (2.5-5 cm) high.
- Shoes end at the ankle and are free of any ties or straps
Optional Details:
- Seam running down the front center of the shoe from the end of the toe up to the ankle.
Additional Images:
[/box] [box]Pants
Required Details:
- Loose fitting, straight cut, tailored black pants with belt loops.
- The pants are ankle length.
- Pants are made of a black twill or similar material.
Required Details:
- Large square gold ring on left middle finger.
Required Details:
- Gold necklace chain that hangs just below the volar bones, with a gold bar that is approximately 1.5 inches long (38 mm) by ~1/4 (6.5 mm) tall bar with a black square printed on the right end.
[/box]
Required Details:
- BlasTech SE-14r repeating blaster
- Color is brushed chromium
- Blaster consists of a roughly 1″ (2.5 cm) diameter with a pinch point at the beginning of the barrel. Barrel has a row of three rounded rectangular grooves cut into the middle of each side.
- Blaster has a narrow scope mounted above the grip that widens at both the front and back.
- Grips appear to be mother-of-pearl [/box]
Required Details:
- Bright red wool or cotton dress socks
COSTUME RESOURCES:
Reference Gallery
Updated: Aug. 27, 2023
For Face Characters: Tattoos and body piercings – No tattoos or body piercings may be visible unless it is a tattoo/piercing the character has. They must be covered with makeup or by the costume.
PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.