Narkina 5 Prisoner

ALL, Allies, Andor

CHARACTER DESCRIPTION
Sentenced to hard labor on Narkina 5 by the Empire, prisoners work daily assembling components for Imperial works. Prisoners like Cassian Andor never belonged in Narkina 5 in the first place. The Empire maintains control of the prison by electrifying the floors whenever there is the slightest disorder or a lack of productivity. When the opportunity presents itself the prisoners organize a large-scale breakout, escaping and leaving behind the Imperial prison. Star Wars Databank

REQUIRED ITEMS:

[box]Shirt

 

Required Details:

  1. The shirt is made out of a white, lightweight material, lightly textured with a grid of squares, such as polyester ripstop or another lightweight ripstop material. Material is slightly translucent; in some sections it is a double layer.
  2. All top-stitching is dark gray or black in color.
  3. The collar is square and made from a double layer of fabric.
  4. The collar is approximately 6cm (2.4 inches) wide, and features a hidden closure on the right side.
  5. The collar is top-stitched with double stitching at both the inner and outer edge.
  6. There are two long rectangle panels, centered down the front and the back of the shirt. These panels are approximately 4 inches wide and follow the length of the shirt. These panels are attached on the outside of the shirt.
  7. Each panel has the appearance of two columns:
  8. There is top stitching with double stitching used on the outer edge, edges are folded under.
  9. There are two rows of topstitching, close together, down the center.
  10. Center stitching is closer width compared to the the edge stitching.
  11. On the front and the back of the shirt, there are double top stitching princess panels, with a sharp turn, from the armhole, down to the hem.
  12. The hem of the shirt is approximately 6cm (2.4 inches) wide, and features a sharp angled notch at both hips, where the hem is reduces in size to approximately 2.5cm (1 inch).
  13. The hem is made of a double layer of fabric.
  14. The hem has two lines of dark gray stitching: one directly under where it attaches to the shirt and the other at the very bottom.
  15. The hem has one vertical seam which lines up with the seam directly under the right arm (where the two trapezoidal panels intersect on the right side)
  16. The shirt, at its longest length, reaches below the waistband of the pants.
  17. The costumers skin at the stomach is not be visible when standing “on program” (with hands held up and behind the head).
  18. The shirt has long sleeves, that reach to the costumers wrist when hands are at the costumers sides.
  19. The sleeves have cuffs, approximately 6.5cm (2.6 inches) wide.
  20. The cuff has a line of dark gray or black stitching just under where it attaches to the shirt and at the edge of the cuff.
  21. On the inside of the wrists, facing the palms, there is a notch that is approximately 3cm (1.2 inches) deep.
  22. The shirt features orange and white accents, made from an iron-on/heat press vinyl material.
  23. The orange accents are on the left shoulder, left arm, and down the left side of the torso.
  24. In addition, there are white accents on both sides of the torso.
  25. The orange accents on the left arm include:
    • Top of Shoulder: a rectangle approximately 10cm x 8.5cm (4 inches x 3.3 inches) , covering the top of the shoulder, and adjoins both the collar and start of sleeve.
    • Deltoid: three (3) elongated orange rectangles at the top, approximately 1.6cm x 8cm (0.6 inches x 3.1 inches)
      Below each rectangle, there is a horizontal line of top stitching.
    • Bicep to Elbow: A long vertical rectangle, approximately 8cm (3.1 inches) wide and 26.5cm (10.5 inches) long, that has a curve at the end, towards the rear, and ends at the costumers elbow.
    • Elbow: Wrapping around behind the elbow is a horizontal rectangle that extends to the inner seam of the sleeve. The bottom aligns with the long vertical rectangle.
    • Forearm: A long vertical rectangle, approximately 8cm (3.1 inches) wide and 22cm long (8.6 inches). It ends at the cuff of the sleeve.
  26. On the left side of the shirt there is a single rectangle, approximately 8cm (3.1 inches) wide and 40cm (15.7 inches) long, that extends from the underarm to the hem of the shirt.
    • The rectangle is curved under the armpit.
  27. The white accents down both sides of the shirt are rhomboid in shape and stacked vertically:
    • On the left side, there are two (2) rows of seven (7) white rhomboid shaped accents, one down each side of the orange rectangle. These rhomboid shapes are together the same length as the orange rectangle.
    • On the right side, there are two (2) rows of seven (7) white rhomboid shaped accents, in the same position as the left side (but with no orange accent).
  28. The right arm has no accents, and no horizontal row of top stitching at the biceps.

Optional Details:

  1. The shirt fabric is a 40 denier ripstop nylon, with a small grid of squares.
  2. There is a small gusset in the armpit.
  3. There is topstitching on the gusset, if included.
  4. The closure may be made using white Velcro.

Additional Images:

 

[/box] [box]Pants

 

Required Details:

  1. The pants are made out of a white, lightweight material, lightly textured with a grid of squares, such as polyester ripstop or another lightweight ripstop material. Material is slightly translucent; in some sections it is a double layer.
  2. The pants material is slightly translucent, with double layers showing a stronger contrast.
  3. All top-stitching is dark gray or black in color.
  4. The pants are loose fit, straight-leg in style, and the waistband has elastic.
  5. If using a drawstring waist, strings must be hidden within the pants.
  6. There are no visible drawstrings or pockets.
  7. The pants end at the costumers ankles, and do not touch the floor.
  8. Two lines of dark grey topstitching on the right leg, on the front side of the pants, (just left of the seam), approximately .5 cm – 1 cm (.2 – .4 inches) of space between the two lines of stitches.
  9. Topstitching on the crotch of the pants, on the seam between the two legs – two lines on the left side of the seam ½ cm – 1 cm (.2 – .4 inches) apart
  10. The hem of the pants is finished, and approximately 4 cm (1.6 inches) wide, and features a single row of top stitching.
  11. There is an orange accent down the left leg: a vertical rectangle that is approximately 8 cm (3 inches) wide, and ends at the waistband.
  12. The end of the accent at the ankle is curved from the back of the calf, and ends at the upper ankle/mid shin.
  13. The orange accent of the pants lines up exactly with the accent on the shirt.
  14. There is a second orange accent on the inside of the left leg, that is approximately 8cm (3 inches) wide and wraps around the pants at approximately the upper ankle/mid shin.

Optional Details:

  1. The shirt fabric is a 40 denier ripstop nylon, with a small grid of squares.

Additional Images:

 

[/box] [box]Bare feet
Required Details:

  1. The costumer is barefoot.
  2. For health & safety reasons, protection may be worn on the feet, such as a suitable skin toned dance shoe, sock, or a natural color flip flop/sandal.

Optional Details:

  1. We recommend that costumers wear invisible shoes of some kind, such as sticky feet, clear shoes, or shoes that match the costumer’s flesh tone.
[/box] [box]Hair/Face/Hands

  1. Hair can be any natural hair style.
  2. Costumer does not wear any jewelry, including earrings, necklaces, and rings.
[/box]

OPTIONAL ITEMS

[box]Machinist Tools

Required Details:

  1. Tools appear to be metallic.
  2. Tools are not significantly weathered.
[/box] [box]Prison Guard Zapp Rods

 

Required Details:

  1. Must be a high quality replica.
  2. Appears to be metallic/made of metal with a double pronged tip.
  3. Is not be significantly weathered.
  4. Is at least a foot and a half long.
  5. Includes a black grip.
[/box] [box]Prison Guard DH-17 Blaster Pistol

Required Details:

  1. Must be a high quality replica – no plastic toys.
  2. Silver pointed tip and black body.
  3. Includes scope on the top and magazine on the side.

Additional Images:

[/box] SHIFT MANAGER

 

[box]Required Items:

  1. Same as above, only difference in the outfit is the addition of an orange accent on the right shoulder on the shirt.
  2. Matches the left shoulder accent.

Optional Items:

  1. Datapad
[/box] [box]Datapad

 

Required Details:

  1. Flat with a black/grey blank screen.
  2. Back is white.
  3. Is not be weathered.
  4. Corners are rounded.
  5. Has a mount and black straps on the back that allow costumer to attach it to their forearm white remaining flat.
  6. Must be a high quality replica.

Additional Images:

[/box]

MEDIC

 

[box]Required Items:

  1. Same as regular prisoner outfit, only difference in the outfit is all orange accents are a light teal on the medic variation.

Optional Items:

  1. Medical bag and tools
[/box] [box]Bag

Required Details:

  1. Bag is white and sturdy.
  2. Includes a short rounded strap on top for carrying in the hand and a longer flat strap for carrying around the costumer’s shoulder. These straps are attached to metal hooks on the top of the bag.
  3. The outside of the bag appears to be sturdy and have two panels held on with screws – one on top of the other. The top most panel includes black geometric detailing.

Additional Images:

[/box] [box]Tools

Required Details:

  1. Can include oxygen max, larger syringe.
  2. Syringe must not be sharp.
  3. All items are metallic looking/appear to be made of metal and not significantly weathered.
  4. Oxygen mask has white plastic edges and connect to a metal breathing apparatus.

Additional Images:

 

[/box]

ADDITIONAL NOTES:

Updated: April 2, 2023

For Face Characters: Tattoos and body piercings – No tattoos or body piercings may be visible unless it is a tattoo/piercing the character has. They must be covered with makeup or by the costume.

PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build.