CHARACTER DESCRIPTION
Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life. (Source: Star War Databank)
Front Image
Image URL: https://drive.google.com/file/d/1EiukkR … drive_link
Required Items
Hair and Face:
Image URL: https://drive.google.com/file/d/1EZCfrO … drive_link
Required Details:
1. Hair or wig styled to match references, auburn or brown in color recommended.
2. Hair is parted on the left side and has a comb-over styled fringe. It is nape-length in the back.
3. Full face beard and mustache, in the same color as the hair/wig cut and styled to match references.
4. Beard is neatly trimmed with harsh angles.
5. Naturally occurring hair colors only.
Optional Details:
1. Blue contact lenses recommended but not required.
2. Hair and beard may be a wig and prosthetics. If the hair is a wig, the wearer’s natural hair must not show. If the beard is a hairpiece or prosthetic edges must be blended. If a wig or hairpieces are used, they must be high quality and look like real hair.
Inner Tunic:
Image URL: https://drive.google.com/file/d/1F6r50r … drive_link
Required Details:
1. Made from the same material type as the outer tunic in a brown color and has a visible texture (e.g. linen).
2. Inner tunic has a high collar, roughly the same height or slightly shorter than the outer tunic collar.
3. Inner tunic folds left over right and sits high on the wearer’s neck.
4. Inner tunic collar is approximately approximately five (5) inches (approximately 12.7cm) wide.
Outer Tunic:
Image URL: https://drive.google.com/file/d/1VeX-kT … drive_link
Required Details:
1. Tunic is made from a matte light tan, off-white, or ecru color fabric that has a visible texture (e.g., linen).
2. Long sleeves are fitted but not skin tight to the wearer.
3. End of the sleeves tucks into the gauntlets.
4. Hem of the outer tunic ends above the wearer’s knees or lower thigh.
5. Opening of the tunic is edged by a band approximately two (2) inches (approximately 5cm) wide.
6. Opening of the tunic rests left over right with the left side ending under the tabards.
7. The “skirt” portion of the outer tunic has no visible openings and flares slightly from the wearer’s hips, so that it does not cling to the wearer’s body.
Additional Images:
Image URL:
https://drive.google.com/file/d/1qqocZc … drive_link
https://drive.google.com/file/d/1mW6xpS … drive_link
Tabards:
Image URL: https://drive.google.com/file/d/1ycSwtE … drive_link
Required Details:
1. Tabards are made from the fabric as the outer tunic.
2. At the back, the tabards end tucked under the obi, they touch or nearly touch but do not overlap.
3. Tabards go over the wearer’s shoulders and extend past the natural shoulder of the wearer no more than 1.5″ / 3.8 cm.
4. In the front, the tabards touch or nearly touch at the belt but do not overlap and continue straight past the belt.
5. Tabards have a consistent width with no significant taper and are shoulder width, from outer tunic collar seam to the outer tunic sleeve seam.
6. The bottom of the tabards extend slightly past the hem of the outer tunic.
7. The hem of the tabards is angled slightly with the outside edge being shorter than the inside edge.
Optional Details:
1. A second tabard, or pleat that only shows slightly on the outside edge of the main tabard may be added for better accuracy but is not required.
Additional Imagers:
Image URL: https://drive.google.com/file/d/1iWBLfY … drive_link
https://drive.google.com/file/d/1j-JtgG … drive_link
Obi:
Image URL: https://drive.google.com/file/d/1EfWIV9 … drive_link
Required Details:
1. Obi is made from the same material and same color as the outer tunic.
2. The Obi extends past the top and bottom edges of the belt no more than 1.5″ / 3.8 cm on the top and no more than 1.5″ / 3.8 cm on the bottom.
3. Obi must be proportionate to the wearer.
Belt:
Image URL: https://drive.google.com/file/d/1hOeYuA … drive_link
Required Details:
1. Belt is made of a brown leather or leather-like material.
2. Belt is made with a thinner strip centered on the wider strip and a silver “bow” shaped buckle detail in the center front of the belt.
3. Wider belt is approximately2.5″ / 6.3 cm wide and the secondary thinner belt is approximately 1″ / 2.5 cm wide.
4. Belt must be proportionate to the wearer.
5. Belt closure in the back is allowed and must be covered by a belt closure cover.
6. Belt Accessory Order Placement (Centre front to the right): belt buckle, pouch, large pouch, pouch and covertec clip.
Additional Images:
Image URL: https://drive.google.com/file/d/1E_AuUI … drive_link
Pouches:
Image URL: https://drive.google.com/file/d/1aGMdFu … drive_link
Required Details:
1. There are three (3) pouches in a slightly lighter brown than the belt, made from the same leather or leather-like material as the belt.
2. Pouches rest at the front side, one on each side of the belt. The third pouch rests in the back on the left side.
3. The pouch that sits in the back is larger in width than the other two (2) pouches.
4. The pouches attach at the smaller center strip of material on the main belt and are long enough to go past the belt 1-1.5″ / 2.5-3.8 cm proportional to the wearer.
Covertec Clip:
Image URL: https://drive.google.com/file/d/1eLhLy4 … drive_link
Required Details:
1. Covertec clip or similar present on the belt on the left side of the belt.
2. Covertec can be either dark gray or black in color.
Gloves:
Image URL: https://drive.google.com/file/d/1F6syH- … drive_link
Required Details:
1. Black gloves that fit the wearer’s hands snugly or skin tight.
2. Gloves are made out of leather or leather-like material.
3. Gloves tuck into the gauntlets.
4. No skin visible.
Armor:
Image URL: https://drive.google.com/file/d/1F6syH- … drive_link
Required Details:
1. Armor must be made out of rigid material. EVA foam is not permitted.
2. Armor is painted matte or satin white.
3. Armor is weathered in shades of gray.
Handplates:
Image URL: https://drive.google.com/file/d/1zLefdI … drive_link
Required Details:
1. On the back of each glove there is a hand plate that extend from the first row of knuckles to just before the wrist. It should not cover the thumb knuckles or go past the back of the hand on the outside edge.
2. Hand plate is trapezoidal in shape with the side that is line with the knuckles longer than the opposite side that is in line with the wrist. Hand plate must be slightly curved the the back of the hand.
3. The other two (2) sides have a slight outwards curve.
4. Weathering on the hand plates consist of light grey scratch lines where the armour has been worn and damaged.
Forearm Armor:
Image URL: https://drive.google.com/file/d/1kjFYti … drive_link
Required Details:
1. Armor is cylindrical in shape and is fitted closely’s to the wearer’s forearm.
2. Armor is seamless on the outside edge.
3. Due to the shape of the armor a butted seam is allowed on the inside edge.
4. Elbow plate is integrated into the forearm. Consists of three (3) shapes the first base section is cylindrical in shape, the second section is half a cylinder in shape and the third section is rectangular in shape. The base section is narrower than the second and third sections.
5. On the right gauntlet there is a design painted on the outside of the forearm. The design is made up of two (2) dark red curved stripes that do not connect at the top or bottom. The space between the curved stripes is filled with a light yellow color. Design is weathered to match the rest of the armor.
Optional Details:
1. Jedi style compad is present on the left forearm.
2. Compad base can either off-white or dark grey in colour and is situated closer to the wrist on the outer side of the arm.
3. Compad has a larger donut button that is closest to the wrist and painted a light yellow/gold the smaller button is painted green.
Additional Images:
Image URL:
https://drive.google.com/file/d/1vGjH6k … drive_link
https://drive.google.com/file/d/18kyu2t … drive_link
Pants:
Image URL: https://drive.google.com/file/d/1EfWIV9 … drive_link
Required Details:
1. Pants are made from a matte tan material and has a visible texture (e.g., linen).
2. Pants are somewhat loose-fitting and blouse slightly where they are tucked into the boot.
3. No visible pockets are allowed, hidden pockets are accepted.
Boots:
Image URL: https://drive.google.com/file/d/1Ec_n6E … drive_link
Required Details:
1. Knee high boots are made of leather or leather-like material in a reddish brown or cognac color.
2. No outside zippers allowed, inside zippers are permitted.
3. Boots have spats on the front of the boots.
4. One (1) band at the ankle made out of the same material and color as the boots. Band is approximately 1″ / 2.5 cm wide and has two (2) keepers, one (1) on the outside leg and one (1) on the inside leg.
5. Weathering to match references is optional but highly recommended.
Lightsaber:
Image URL: https://drive.google.com/file/d/1YIkN4R … drive_link
Required Details:
1. Obi-Wan Kenobi Hero lightsaber hilt (RotS).
2. Nickel colored plating.
3. Control box in the center of the hilt with gold button.
4. Covertec wheel at the pomel end of hilt, black or dark gray in color. Positioned at a 90 degree angle from the control box.
5. Black handgrip sections positioned on either side of the control box, one above is longer than the one below. Ridges are horizontal.
6. Narrow neck between handgrip and emitter, lower part is gold and upper part is copper in color.
7. Pomel is round with squared details.
8. Emitter is round with a raised ridge.
9. No toy sabers, no Ultimate FX short saber.
10. The lightsaber may be a static prop (hilt-only) or have a blade.
Optional Details:
1. Attached blade(s), LED lights, and sound effects, are allowed but not required.
2. If bladed, must be blue.
Optional Items
Outer Robe:
Image URL: https://drive.google.com/file/d/1ICc8nn … drive_link
Required Details:
1. Brown robe with a rounded large hood, sleeves which are three (3) handwidths wide (approximately the length of the sleeve from shoulder to hem) and shoulder tucks.
2. When hood is down it reaches to the middle of the back and hangs over the edge of the shoulders.
3. Robe is made of a heavy-weight, matte fabric (wool recommended).
4. Robe should be no more than 2″ / 5 cm off the ground.
Additional Images:
Image URL: https://drive.google.com/file/d/1m3-ZT1 … drive_link
https://drive.google.com/file/d/1Ezn9Kt … drive_link
https://drive.google.com/file/d/1cJJhYs … drive_link
https://drive.google.com/file/d/11SPDea … drive_link
Costume Resources: Photo Reference Gallery – https://drive.google.com/drive/folders/ … MytnjTqjmE
Author: Ashlyn_Dubreas (Tarleah Hatch) and Shay Kenobi
Revision Date: 5th February 2026
PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum.